SN74LVC2G06-EP Driver Datasheet

SN74LVC2G06-EP Datasheet, PDF, Equivalent


Part Number

SN74LVC2G06-EP

Description

Dual Inverter Buffer and Driver

Manufacture

etcTI

Total Page 12 Pages
Datasheet
Download SN74LVC2G06-EP Datasheet


SN74LVC2G06-EP
www.ti.com
FEATURES
Controlled Baseline
– One Assembly/Test Site, One Fabrication
Site
Extended Temperature Performance of –55°C
to 125°C
Enhanced Diminishing Manufacturing
Sources (DMS) Support
Enhanced Product-Change Notification
Qualification Pedigree (1)
Supports 5-V VCC Operation
Max tpd of 4.6 ns at 3.3 V
Low Power Consumption, 10-µA Max ICC
• ±24-mA Output Drive at 3.3 V
Typical VOLP (Output Ground Bounce)
<0.8 V at VCC = 3.3 V, TA = 25°C
(1) Component qualification in accordance with JEDEC and
industry standards to ensure reliable operation over an
extended temperature range. This includes, but is not limited
to, Highly Accelerated Stress Test (HAST) or biased 85/85,
temperature cycle, autoclave or unbiased HAST,
electromigration, bond intermetallic life, and mold compound
life. Such qualification testing should not be viewed as
justifying use of this component beyond specified
performance and environmental limits.
SN74LVC2G06-EP
DUAL INVERTER BUFFER/DRIVER
WITH OPEN-DRAIN OUTPUTS
SCES660 – JUNE 2006
Typical VOHV (Output VOH Undershoot)
>2 V at VCC = 3.3 V, TA = 25°C
Inputs and Open-Drain Outputs Accept
Voltages up to 5.5 V
Ioff Supports Partial-Power-Down Mode
Operation
Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1000-V Charged-Device Model (C101)
DCK PACKAGE
(TOP VIEW)
1A
GND
2A
1
2
3
6 1Y
5 VCC
4 2Y
DESCRIPTION/ORDERING INFORMATION
This dual inverter buffer/driver is designed for 1.65-V to 5.5-V VCC operation.
The output of the SN74LVC2G06 device is open drain and can be connected to other open-drain outputs to
implement active-low wired-OR or active-high wired-AND functions. The maximum sink current is 32 mA.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
ORDERING INFORMATION
TA
–55°C to 125°C
PACKAGE (1)
SOT (SC-70) – DCK
Tape and reel
ORDERABLE PART NUMBER
TOP-SIDE MARKING
SN74LVC2G06MDCKREP
CTO
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
FUNCTION TABLE
(each inverter)
INPUT
A
H
L
OUTPUT
Y
L
H
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2006, Texas Instruments Incorporated

SN74LVC2G06-EP
SN74LVC2G06-EP
DUAL INVERTER BUFFER/DRIVER
WITH OPEN-DRAIN OUTPUTS
SCES660 – JUNE 2006
LOGIC DIAGRAM (POSITIVE LOGIC)
1A 1
6 1Y
2A 3
4 2Y
www.ti.com
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
VCC Supply voltage range
VI Input voltage range(2)
VO Voltage range applied to any output in the high-impedance or power-off state(2)
VO Voltage range applied to any output in the high or low state(2)(3)
IIK Input clamp current
VI < 0
IOK Output clamp current
VO < 0
IO Continuous output current
Continuous current through VCC or GND
θJA Package thermal impedance(4)
Tstg Storage temperature range
MIN MAX UNIT
–0.5 6.5 V
–0.5 6.5 V
–0.5 6.5 V
–0.5 6.5 V
–50 mA
–50 mA
±50 mA
±100 mA
259 °C/W
–65 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.
(3) The value of VCC is provided in the recommended operating conditions table.
(4) The package thermal impedance is calculated in accordance with JESD 51-7.
2 Submit Documentation Feedback


Features www.ti.com FEATURES • Controlled Basel ine – One Assembly/Test Site, One Fab rication Site • Extended Temperature Performance of –55°C to 125°C • E nhanced Diminishing Manufacturing Sourc es (DMS) Support • Enhanced Product-C hange Notification • Qualification Pe digree (1) • Supports 5-V VCC Operati on • Max tpd of 4.6 ns at 3.3 V • L ow Power Consumption, 10-µA Max ICC ±24-mA Output Drive at 3.3 V • Typ ical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C (1) Compone nt qualification in accordance with JED EC and industry standards to ensure rel iable operation over an extended temper ature range. This includes, but is not limited to, Highly Accelerated Stress T est (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, ele ctromigration, bond intermetallic life, and mold compound life. Such qualifica tion testing should not be viewed as ju stifying use of this component beyond s pecified performance and environmental limits. SN74LVC2G06-EP DUAL INVERTER BUFFER/DRIVER W.
Keywords SN74LVC2G06-EP, datasheet, pdf, etcTI, Dual, Inverter, Buffer, and, Driver, N74LVC2G06-EP, 74LVC2G06-EP, 4LVC2G06-EP, SN74LVC2G06-E, SN74LVC2G06-, SN74LVC2G06, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)