HCM1A1307V2 inductors Datasheet

HCM1A1307V2 Datasheet, PDF, Equivalent


Part Number

HCM1A1307V2

Description

Automotive grade high current power inductors

Manufacture

EATON

Total Page 15 Pages
Datasheet
Download HCM1A1307V2 Datasheet


HCM1A1307V2
Technical Data 10905
Effective April 2019
HCM1A1307V2
Automotive grade high current power inductors
Product features
AEC-Q200 qualified
High current carrying capacity
Magnetically shielded, low EMI
DC-DC converter applications up to 1 MHz
Filtering applications up to Self Resonant
Frequency (SRF) [See product specification
table]
Inductance range from 0.22 μH to 56 μH
Current range from 4.0 A to 100 A
13.8 mm x 12.9 mm footprint surface mount
package in a 6.5 mm height
Moisture Sensitivity Level (MSL): 1
Alloy powder core material
Applications
Body electronics
Central body control module
Headlamps, tail lamps and interior lighting and
LED lighting
Heating ventilation and air conditioning
controllers (HVAC)
Doors, window lift and seat control
Advanced driver assistance systems
Adaptive cruise control (ACC)
Automatic parking control
Collision avoidance system/ Car black
box system
Infotainment and cluster electronics
Audio subsystem: head unit and trunk amp
Digital instrument cluster
In-vehicle infotainment (IVI) and navigation
Chassis and safety electronics
Airbag control unit
Electronic stability control system (ESC)
Electric parking brake
Electronic power steering (EPS)
Engine and Powertrain Systems
Electric pumps, motor control and auxiliaries
Powertrain control module (PCU)/
Engine Control unit (ECU)
Transmission Control Unit (TCU)
Environmental data
Storage temperature range (Component):
-55 °C to +155 °C
Operating temperature range: -55 °C to +155 °C
(ambient plus self-temperature rise)
Solder reflow temperature:
J-STD-020 (latest revision) compliant
Pb HFHALOGEN
FREE

HCM1A1307V2
Technical Data 10905
Effective April 2019
Product specifications
HCM1A1307V2
Automotive grade high current power inductors

Part number6
HCM1A1307V2-R22-R
HCM1A1307V2-R33-R
HCM1A1307V2-R47-R
HCM1A1307V2-1R0-R
HCM1A1307V2-1R2-R
HCM1A1307V2-1R5-R
HCM1A1307V2-1R8-R
HCM1A1307V2-2R2-R
HCM1A1307V2-3R3-R
HCM1A1307V2-4R7-R
HCM1A1307V2-5R6-R
HCM1A1307V2-6R8-R
HCM1A1307V2-7R8-R
HCM1A1307V2-8R2-R
HCM1A1307V2-100-R
HCM1A1307V2-120-R
HCM1A1307V2-150-R
HCM1A1307V2-220-R
HCM1A1307V2-330-R
HCM1A1307V2-560-R
OCL1
(μH) ± 20%
0.22
0.33
0.47
1.0
1.2
1.5
1.8
2.2
3.3
4.7
5.6
6.8
7.8
8.2
10
12
15
22
33
56
FLL2 (μH)
minimum
I(rAm)s3
I(sAat)4
0.14 52 100
0.21 47 70
0.30 43 56
0.64 28 34
0.76 22.5 30
0.96 21 25
1.15 19 24
1.40 18.5 23
2.11 16.5 18
3.00 13 20
3.58 12 18
4.35 10 15
4.99 10 16
5.25 10 14
6.40 8.3 13.5
7.68 8.0 12.5
9.60 7.0 11
14.1 6.0 8
21.0 5.0 7.5
35.8 4.0 4.3
DCR (mΩ)
typical @ +20 °C
0.46
0.58
0.73
1.49
1.78
2.04
2.55
2.62
3.55
6.25
7.21
9.50
10.25
10.3
15.0
16.4
20.3
28.8
40.8
55.0
DCR (mΩ)
maximum @ +20 °C
0.60
0.69
0.87
1.75
2.10
2.40
2.94
3.10
4.10
7.25
8.30
11.5
11.78
11.85
17.2
18.9
23.4
33.1
45.0
65.0
SRF (MHz)
typical
135
80
59
34
34
31
26
24
18
14
11
9
9
8
7
6
6
5
3
2
K-factor5
244
219
186
149
117
126
105
95
90
71
64
52
46
46
43
38
35
28
26
23
1. Open Circuit Inductance (OCL) Test Parameters: 100 kHz, 0.25 Vrms, 0.0 Adc, +25 °C
2. Full Load Inductance (FLL) Test Parameters: 100 kHz, 0.25 Vrms, Isat, , +25 °C
3. Irms: DC current for an approximate temperature rise of 30 °C without core loss. Derating is necessary for AC currents.
PCB layout, trace thickness and width, air-flow, and proximity of other heat generating components will affect the
temperature rise. It is recommended that the temperature of the part not exceed +155 °C under worst case operating
conditions verified in the end application.
4. Isat: Peak current for approximately 20% rolloff @ +25 °C
5. K-factor: Used to determine Bp-p for core loss (see graph). Bp-p = K * L * ΔI. Bp-p: (Gauss), K: (K-factor from table),
L: (Inductance in μH), ΔI (Peak to peak ripple current in Amps).
6. Part Number Definition: HCM1A1307V2-xxx-R
HCM1A1307V2 = Product code and size
xxx= inductance value in μH, R= decimal point,
If no R is present then last character equals number of zeros
-R suffix = RoHS compliant
2 www.eaton.com/electronics


Features Technical Data 10905 Effective April 20 19 HCM1A1307V2 Automotive grade high current power inductors Product featur es • AEC-Q200 qualified • High cu rrent carrying capacity • Magnetical ly shielded, low EMI • DC-DC convert er applications up to 1 MHz • Filter ing applications up to Self Resonant Fr equency (SRF) [See product specificatio n table] • Inductance range from 0.2 2 μH to 56 μH • Current range from 4.0 A to 100 A • 13.8 mm x 12.9 mm footprint surface mount package in a 6. 5 mm height • Moisture Sensitivity L evel (MSL): 1 • Alloy powder core ma terial Applications • Body electron ics • Central body control module Headlamps, tail lamps and interior l ighting and LED lighting • Heating v entilation and air conditioning control lers (HVAC) • Doors, window lift and seat control • Advanced driver assi stance systems • Adaptive cruise con trol (ACC) • Automatic parking contr ol • Collision avoidance system/ Car black box system • Infotainment and cluster electronics • Aud.
Keywords HCM1A1307V2, datasheet, pdf, EATON, Automotive, grade, high, current, power, inductors, CM1A1307V2, M1A1307V2, 1A1307V2, HCM1A1307V, HCM1A1307, HCM1A130, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)