Document
L99DZ100G, L99DZ100GP
Automotive door module with LIN and HS-CAN (L99DZ100G) or HS-CAN supporting selective wake up (L99DZ100GP)
Datasheet - production data
Features
AEC Q100 compliant qualified
1 half bridge for 7.5 A load (RON = 100 mΩ) 1 half bridge for 7.5 A load (RON = 150 mΩ) 2 half bridges for 0.5 A load (RON = 2000 mΩ) 2 half bridges for 3 A load (RON = 300 mΩ) 1 configurable high-side driver for up to 1.5 A
(RON = 500 mΩ) or 0.35 A (RON = 1600 mΩ) load
1 configurable high-side driver for 0.8 A (RON = 800 mΩ) or 0.35 A (RON = 1600 mΩ) load
3 configurable high-side drivers for 0.15 A/0.35 A (RON =2 Ω)
1 configurable high-side driver for 0.25 A/0.5 A (RON = 2 Ω) to supply EC Glass MOSFET
4 configurable high-side drivers for 0.15 A/0.25 A (RON = 5 Ω)
Internal 10bit PWM timer for each stand-alone high-side driver
Buffered supply for voltage regulators and 2 high-side drivers (OUT15 & OUT_HS / both P-channel) to supply e.g. external contacts
Programmable soft-start function to drive loads with higher inrush currents as current limitation value (for OUT1-6, OUT7, OUT8 and OUT_HS) with thermal expiration feature
All the embedded outputs come with protection and supervision features: – Current Monitor (high-side only) – Open-load – Overcurrent – Thermal warning – Thermal shutdown
Fully protected driver for external MOSFETs in H-bridge configuration or dual Half bridge configuration
Fully protected driver for external high-side MOSFET
Control block for electro-chromic element
Two 5 V voltage regulators for microcontroller and peripheral supply
Programmable reset generator for power-on and undervoltage
Configurable window watchdog
LIN 2.2a compliant (SAEJ2602 compatible) transceiver
Advanced high speed CAN transceiver (ISO 11898-2:2003 /-5:2007 and SAE J2284 compliant) with local failure and bus failure diagnosis and selective wake-up functionality according to ISO 11898-6:2013
Separated (Isolated) fail-safe block with 2 LS (RON = 1 Ω) to pull down the gates of the external HS MOSFETs
Thermal clusters
A/D conversion of supply voltages and internal temperature sensors
Embedded and programmable VS duty cycle adjustment for LED driver outputs
Applications
Door zone applications.
March 2019
This is information on a product in full production.
DS11546 Rev 5
1/197
www.st.com
L99DZ100G, L99DZ100GP
Table 1. Device summary
Package
Variant
LQFP-64 epad LQFP-64 epad
High Speed CAN Transceiver with partial networking (ISO 11898-6:2013)
High Speed CAN Transceiver (ISO 11898-2:2003 and 11898-5:2007)
Order codes
Tray
Tape and reel
L99DZ100GP
L99DZ100GPTR
L99DZ100G
L99DZ100GTR
Product label
2/197
DS11546 Rev 5
L99DZ100G, L99DZ100GP
Contents
Contents
1 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2 Block diagram and pin descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3 Electrical specifications . . . .