SILICON BRIDGE RECTIFIERS
KBPC3500W - KBPC3510W
PRV : 50 - 1000 Volts Io : 35 Amperes
SILICON BRIDGE RECTIFIERS BR50MW
0.751 (19.1) 0.673 (17.1)
...
Description
KBPC3500W - KBPC3510W
PRV : 50 - 1000 Volts Io : 35 Amperes
SILICON BRIDGE RECTIFIERS BR50MW
0.751 (19.1) 0.673 (17.1)
FEATURES :
* High current capability * High surge current capability * High reliability * Low reverse current * Low forward voltage drop * Pb / RoHS Free
MECHANICAL DATA :
* Case : Metal Case * Epoxy : UL94V-O rate flame retardant * Terminals : plated .25" (6.35 mm). Faston * Polarity : Polarity symbols marked on case * Mounting position : Bolt down on heat-sink with
silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency. * Weight : 22.88 grams(approximately)
1.134 (28.8) 1.110 (28.2)
0.488 (12.4) 0.409 (10.4)
0.193 (4.9)
0.0413 (1.05) 0.0375 (0.95)
0.441 (11.2) 0.425 (10.8)
1.2 (30.5) MIN.
Dimensions in inches and ( millimeters )
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATING
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Current Tc = 55C
Peak Forward Surge Current Single half sine wave
Superimposed on rated load (JEDEC Method)
Current Squared Time at t < 8.3 ms.
Maximum Forward Voltage per Diode at IF = 17.5 A
Maximum DC Reverse Current
Ta = 25 C
at Rated DC Blocking Voltage
Ta = 100 C
Typical Thermal Resistance (Note 1)
Typical Thermal Resistance at Ju...
Similar Datasheet