Document
M29FxxxFT/B Features
Micron Parallel NOR Flash Embedded Memory
Top/Bottom Boot Block 5V Supply M29F200FT/B, M29F400FT/B, M29F800FT/B, M29F160FT/B
Features
• Supply voltage – VCC = 5V
• Access time: 55ns • Program/erase controller
– Embedded byte/word program algorithms • Erase suspend and resume modes • Low power consumption
– Standby and automatic standby • 100,000 PROGRAM/ERASE cycles per block • Electronic signature
– Manufacturer code: 0x01h • Top device codes
– M29F200FT: 0x2251 – M29F400FT: 0x2223 – M29F800FT: 0x22D6 – M29F160FT: 0x22D2 • Bottom device codes – M29F200FB: 0x2257 – M29F400FB: 0x22AB – M29F800FB: 0x2258 – M29F160FB: 0x22D8
• RoHS-compliant packages – TSOP48 – SO44 (16Mb not available for this package)
• Automotive device grade 3 – Temperature: –40 to +125°C
• Automotive device grade 6 – Temperature: –40 to +85°C
• Automotive grade certified (AEC-Q100)
CCMTD-1725822587-8401 m29fxxxf/t_2mb-16mb.pdf - Rev. C 5/18 EN
1 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2013 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.
M29FxxxFT/B Features
Part Numbering Information
Devices are shipped from the factory with memory content bits erased to 1. For available options, such as packages, or for further information, contact your Micron sales representative. Part numbers can be verified at www.micron.com. Feature and specification comparison by device type is available at www.micron.com/products. Contact the factory for devices not found.
Table 1: Part Number Information
Part Number Category
Device Type Density
Technology Configuration Speed
Package Temperature Range Shipping Options
Fab Location
Category Details M29F = 5V 200 = 2Mb 400 = 4Mb 800 = 8Mb 160 = 16Mb (not available in SO 44 package) F = 110nm T = Top boot B = Bottom boot 55 = 55ns device speed in conjunction with temperature range = 3, which denotes Auto Grade – 40 to 125 °C parts 5A = 55ns access time (Auto Grade) only in conjunction with the Grade 6 option M = SO 44 N = TSOP 48 12mm x 20mm AL 42 6 = –40°C to +85°C 3 = –40°C to +125°C blank = standard packing (Tray) E = RoHS-compliant package, standard packing (tray) T = Tape and reel packing (24mm) F = RoHS-compliant package, tape and reel packing (24mm) 2 = Fab 13 (Singapore)
CCMTD-1725822587-8401 m29fxxxf/t_2mb-16mb.pdf - Rev. C 5/18 EN
2 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2013 Micron Technology, Inc. All rights reserved.
M29FxxxFT/B Features
Contents
Important Notes and Warnings ......................................................................................................................... 6 General Description ......................................................................................................................................... 6 Signal Assignments ......................................................................................................................................... 16
TSOP Pin Assignments ................................................................................................................................ 16 Small-Outline Pin Assignments ................................................................................................................... 20 Signal Descriptions ......................................................................................................................................... 23 Bus Operations ............................................................................................................................................... 25 Read .......................................................................................................................................................... 25 Write .......................................................................................................................................................... 25 Output Disable ........................................................................................................................................... 25 Standby ..................................................................................................................................................... 25 Automatic Standby ..................................................................................................................................... 25 Command Interface ....................................................................................................................................... 26 READ/RESET Command ............................................................................................................................ 26 AUTO SELECT Command .....................................................................