INVERTER BUFFERS/DRIVERS. SN7406 Datasheet

SN7406 BUFFERS/DRIVERS. Datasheet pdf. Equivalent

SN7406 Datasheet
Recommendation SN7406 Datasheet
Part SN7406
Description HEX INVERTER BUFFERS/DRIVERS
Feature SN7406; SN5406, SN5416, SN7406, SN7416 HEX INVERTER BUFFERS/DRIVERS WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS.
Manufacture etcTI
Datasheet
Download SN7406 Datasheet




Texas Instruments SN7406
SN5406, SN5416, SN7406, SN7416
HEX INVERTER BUFFERS/DRIVERS
WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS
SDLS031A – DECEMBER 1983 – REVISED DECEMBER 2001
D Convert TTL Voltage Levels to MOS Levels
D High Sink-Current Capability
D Input Clamping Diodes Simplify System
Design
D Open-Collector Drivers for Indicator Lamps
and Relays
D Inputs Fully Compatible With Most TTL
Circuits
description
These TTL hex inverter buffers/drivers feature
high-voltage open-collector outputs for interfacing
with high-level circuits (such as MOS) or for
driving high-current loads (such as lamps or
relays), and also are characterized for use as
inverter buffers for driving TTL inputs. The
SN5406 and SN7406 have minimum breakdown
voltages of 30 V. The SN5416 and SN7416 have
minimum breakdown voltages of 15 V. The
maximum sink current is 30 mA for the SN5406
and SN5416, and 40 mA for the SN7406 and
SN7416.
SN5406, SN5416 . . . J OR W PACKAGE
SN7406 . . . D, N, OR NS PACKAGE
SN7416 . . . D OR N PACKAGE
(TOP VIEW)
1A
1Y
2A
2Y
3A
3Y
GND
1
2
3
4
5
6
7
14 VCC
13 6A
12 6Y
11 5A
10 5Y
9 4A
8 4Y
SN5406 . . . FK PACKAGE
(TOP VIEW)
2A
3 2 1 20 19
4 18
6Y
NC 5
17 NC
2Y 6
16 5A
NC 7
15 NC
3A 8
14 5Y
9 10 11 12 13
NC – No internal connection
ORDERING INFORMATION
TA
PACKAGE†
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
0°C to 70°C
SOIC – D
Tube
Tape and reel
Tube
Tape and reel
SN7406D
SN7406DR
SN7416D
SN7416DR
7406
7416
PDIP – N
Tube
SN7406N
SN7416N
SN7406N
SN7416N
SOP – NS
Tape and reel SN7406NSR
SN7406
CDIP – J
Tube
Tube
SNJ5406J
SNJ5416J
SNJ5406J
SNJ5416J
–55°C to 125°C
CDIP – W
Tube
Tube
SNJ5406W
SNJ5416W
SNJ5406W
SNJ5416W
LCCC – FK Tube
SNJ5406FK
SNJ5406FK
Package drawings, standard packing quantities, thermal data, symbolization, and PCB design
guidelines are available at www.ti.com/sc/package.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright 2001, Texas Instruments Incorporated
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
1



Texas Instruments SN7406
SN5406, SN5416, SN7406, SN7416
HEX INVERTER BUFFERS/DRIVERS
WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS
SDLS031A DECEMBER 1983 REVISED DECEMBER 2001
logic diagram (positive logic)
1A 1
2 1Y
2A 3
4 2Y
3A 5
6 3Y
4A 9
8 4Y
5A 11
10 5Y
6A 13
Y=A
12 6Y
schematic (each buffer/driver)
6 k
Input A
06, 16
VCC
1.4 k
1.6 k
Output Y
2 k
100
1 k
GND
Resistor values shown are nominal.
absolute maximum ratings over operating free-air temperature (unless otherwise noted)
Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 V
Input voltage, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5 V
Output voltage, VO (see Notes 1 and 2): SN5406, SN7406 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V
SN5416, SN7416 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 V
Package thermal impedance, θJA (see Note 3): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86°C/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80°C/W
NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76°C/W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65°C to 150°C
Stresses beyond those listed under absolute maximum ratingsmay cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditionsis not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Voltage values are with respect to network ground terminal.
2. This is the maximum voltage which should be applied to any output when it is in the off state.
3. The package thermal impedance is calculated in accordance with JESD 51-7.
2 POST OFFICE BOX 655303 DALLAS, TEXAS 75265



Texas Instruments SN7406
recommended operating conditions
VCC
VIH
VIL
Supply voltage
High-level input voltage
Low-level input voltage
VOH High-level output voltage
IOL Low-level output current
TA Operating free-air temperature
SN5406, SN5416, SN7406, SN7416
HEX INVERTER BUFFERS/DRIVERS
WITH OPEN-COLLECTOR HIGH-VOLTAGE OUTPUTS
SDLS031A DECEMBER 1983 REVISED DECEMBER 2001
SN5406
SN5416
MIN NOM MAX
SN7406
SN7416
MIN NOM MAX
UNIT
4.5 5 5.5 4.75 5 5.25 V
2 2V
0.8 0.8 V
06 30 30
V
16 15 15
30 40 mA
55 125 0
70 °C
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
SN5406
SN5416
MIN TYP
MAX
SN7406
SN7416
MIN TYP
MAX
VIK VCC = MIN,
II = 12 mA
1.5
IOH VCC = MIN,
VIL = 0.8 V, VOH = §
0.25
VOL
VCC = MIN,
VIH = 2 V
IOL = 16 mA
IOL =
0.4
0.7
II
VCC = MAX,
VI = 5.5 V
1
IIH
VCC = MAX,
VIH = 2.4 V
40
IIL
VCC = MAX,
VIL = 0.4 V
1.6
ICCH
VCC = MAX
30 48
30
ICCL
VCC = MAX
32 51
32
For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions.
All typical values are at VCC = 5 V, TA = 25°C.
§ VOH = 30 V for 06 and 15 V for 16.
IOL = 30 mA for SN54and 40 mA for SN74.
1.5
0.25
0.4
0.7
1
40
1.6
48
51
UNIT
V
mA
V
mA
µA
mA
mA
mA
switching characteristics, VCC = 5 V, TA = 25°C (see Figure 1)
PARAMETER
FROM
(INPUT)
TO
(OUTPUT)
TEST CONDITIONS
tPLH
tPHL
A
Y RL = 110 , CL = 15 pF
MIN TYP MAX UNIT
10 15
ns
15 23
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
3





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)