SERVICE MANUAL. HCD-PX333 Datasheet

HCD-PX333 MANUAL. Datasheet pdf. Equivalent

Part HCD-PX333
Description MICRO HI-FI COMPONENT SYSTEM SERVICE MANUAL
Feature SERVICE MANUAL Ver 1.0 2001. 06 HCD-PX333 AEP Model UK Model E Model Australian Model HCD-PX333 is.
Manufacture Sony
Datasheet
Download HCD-PX333 Datasheet

SERVICE MANUAL Ver 1.0 2001. 06 HCD-PX333 AEP Model UK Mode HCD-PX333 Datasheet
Recommendation Recommendation Datasheet HCD-PX333 Datasheet




HCD-PX333
SERVICE MANUAL
Ver 1.0 2001. 06
HCD-PX333
AEP Model
UK Model
E Model
Australian Model
HCD-PX333 is the Amplifier, CD player, MD
Deck and Tuner section in CMT-PX333.
US and foreign patents licensed from Dolby
Laboratories.
CD
Section
MD
Section
Model Name Using Similar Mechanism
CD Mechanism Type
Base Unit Name
Optical Pick-up Name
Model Name Using Similar Mechanism
MD Mechanism Type
Optical Pick-up Name
HCD-MD595
CDM55A-21BD53
BU-21BD53
OP Assy (A-MAX. 2)
HCD-MD595
MDM-7X2A
KMS-262
SPECIFICATIONS
Amplifier section
European model:
DIN power output (Rated):20 + 20 watts
(6 ohms at 1 kHz, DIN,
230 V)
Continuous RMS power output (Reference):
25 + 25 watts
(6 ohms at 1 kHz,
10% THD, 230 V)
Music power output (Reference):
50 + 50 watts
Other models:
DIN power output (Rated):20 + 20 watts (6 ohms at
1 kHz, DIN, 240 V)
18 + 18 watts (6 ohms at
1 kHz, DIN, 220 V)
Continuous RMS power output (Reference):
25 + 25 watts
(6 ohms at 1 kHz, 10%
THD, 240 V)
23 + 23 watts
(6 ohms at 1 kHz, 10%
THD, 220 V)
Inputs
TAPE IN (phono jacks): voltage 250 mV,
impedance 47 kilohms
DIGITAL OPTICAL IN (Supported sampling
frequencies: 32 kHz, 44.1 kHz and 48 kHz)
Outputs
TAPE OUT (phono jacks): voltage 250 mV,
impedance 1 kilohm
PHONES (stereo minijack):
accepts headphones of
8 ohms or more.
SPEAKER:
accepts impedance of 6 to
16 ohms.
CD player section
System
Laser
Frequency response
MD deck section
System
Laser
Sampling frequency
Frequency response
Compact disc and digital
audio system
Semiconductor laser
(λ=800 nm)
Emission duration:
continuous
2 Hz 20 kHz
MiniDisc digital audio
system
Semiconductor laser
(λ=780 nm)
Emission duration:
continuous
44.1 kHz
5 Hz 20 kHz
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
87.5 108.0 MHz
(50 kHz step)
Antenna
FM lead antenna
Antenna terminals
75 ohms unbalanced/
300 ohms balanced
Intermediate frequency 10.7 MHz
AM tuner section
Tuning range
European model:
531 1,602 kHz
(with the interval set at
9 kHz)
Other models:
Antenna
Intermediate frequency
531 1,602 kHz
(with the interval set at
9 kHz)
530 1,710 kHz
(with the interval set at
10 kHz)
AM loop antenna
External antenna terminals
450 kHz
General
Power requirements
European model:
230 V AC, 50/60 Hz
Australian and Hong Kong models:
220 240 V AC, 50/60 Hz
Power consumption
European model:
70 watts
0.8 W or less in standby
mode
Other models:
70 watts
Dimensions (w/h/d) incl. projecting parts and controls
Approx. 190 × 141 ×
325 mm
Mass
Approx. 4.9 kg
Design and specifications are subject to change
without notice.
MICRO HI-FI COMPONENT SYSTEM
9-873-168-01
2001F1600-1
© 2001.6
Sony Corporation
Home Audio Company
Shinagawa Tec Service Manual Production Group



HCD-PX333
HCD-PX333
SELF-DIAGNOSIS FUNCTION
The self-diagnosis function consists of error codes for customers, which are displayed automatically when errors occur, and error codes,
which show the error history in the test mode during servicing. For details on how to view error codes for the customer, refer to the following
box in the instruction manual. For details on how to check error codes during servicing, refer to the following “Procedure for using the Self-
Diagnosis Function (Error History Display Mode)”.
Self-diagnosis display
This system has a Self-diagnosis display
function to let you know if there is a system
malfunction. The display shows a code made
up of three letters and a message alternately to
show you the problem. To solve the problem
refer to the following list. If any problem
persists, consult your nearest Sony dealer.
C11/Protected
The MD is protected against erasure.
t Remove the MD and slide the tab to close the
slot.
C12/Cannot Copy
You tried to record a CD or MD with a format that
the system does not support, such as a CD-ROM.
t Remove the disc and turn off the system once,
then turn it on again.
C13/REC Error
Recording could not be performed properly.
t Move the system to a stable place, and start
recording over from the beginning.
The MD is dirty or scratched, or the MD does not
meet the standards.
t Replace the MD and start recording over from
the beginning.
C13/Read Error
The MD deck cannot read the disc information
properly.
t Remove the MD once, then insert it again.
C14/Toc Error
The MD deck cannot read the disc information
properly.
t Replace the MD.
t Erase all the recorded contents of the MD using
the All Erase function.
C41/Cannot Copy
The sound source is a copy of a commercially
available music software, or you tried to record a
CD-R (Recordable CD).
t The Serial Copy Management System prevents
making a digital copy (see page 44). You cannot
record a CD-R.
C71/Check OPT-IN
This appears momentarily because of the signal of
the digital broadcast during recording.
t There is no affect on the recorded contents.
No component is connected to the DIGITAL
OPTICAL IN jack, or a digital component is not
connected properly.
t Connect a digital component to the DIGITAL
OPTICAL IN jack properly using a digital
connecting cable.
The connected digital component is not turned on.
t See the operating instructions supplied with the
connected component and confirm whether the
component is turned on.
The digital connecting cable connected to the
DIGITAL OPTICAL IN jack is pulled out, or the
connected digital component is turned off during
digital recording.
t Connect the cable, or turn on the digital
component.
E0001/MEMORY NG
There is an error in the internal data that the system
needs in order to operate.
t Consult your nearest Sony dealer.
E0101/LASER NG
There is a problem with the optical pickup.
t The optical pickup may have failed. Consult your
nearest Sony dealer.
MD SECTION
PROCEDURE FOR USING THE SELF-DIAGNOSIS FUNCTION (ERROR HISTORY DISPLAY MODE)
Note 1:About “R”
As this unit has only a few buttons, some operations require the use of remote commander (RM-S55EM/provided with unit: 1-476-664-21)
buttons. These operations are indicated as “R” in this manual.
Example: MENU/NO “R” ...Press the [MENU/NO] button of the remote commander.
Note 2:Incorrect operations may be performed if the MD test mode is not entered properly.
In this case, press the ?/1 button to turn the power off, and retry to enter the MD test mode.
Note 3:Perform the self-diagnosis function in the “error history display mode” in the MD test mode. The following describes the least required
procedure. Be careful not to enter other modes by mistake. If you set other modes accidentally, press the MENU/NO “R” button to exit the
mode.
Procedure:
1. Press the ?/1 button to turn the power on.
2. Press the [FUNCTION] button to set the MD function.
3. Press three buttons of M > TUNING+ , [REC MODE], and . m (MD) simultaneously to enter the MD test mode and display “[Check]”.
4. Press the . “R” or > “R” button to display “[Service]”.
5. Press the ENTER/YES “R” button to display “AUTO CHECK”, and press the > “R” button to display “Err Display”.
6. Press the ENTER/YES “R” button to enter the error history mode and display “op rec tm”.
7. Select the contents to be displayed or executed using the . “R” or > “R” button.
8. Press the [CD SYNC NORMAL] button to light up “IT” indicator, then press the [REC MODE] button will display or execute the
contents selected.
9. Press the [REC MODE] button another time returns to step 7.
10. Press the MENU/NO “R” button displays “Err Display” and release the error history mode.
11. To release the MD test mode, press the [REPEAT STEREO/MONO] button to display “Initialize” and release the MD test mode.
2





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)