OPERATIONAL AMPLIFIER. TLC2201-SP Datasheet

TLC2201-SP AMPLIFIER. Datasheet pdf. Equivalent


Part TLC2201-SP
Description LOW NOISE PRECISION OPERATIONAL AMPLIFIER
Feature TLC2201-SP www.ti.com SLOS710 – FEBRUARY 2011 CLASS V, ADVANCED LinCMOS™ LOW NOISE PRECISION OPER.
Manufacture etcTI
Datasheet
Download TLC2201-SP Datasheet


TLC2201-SP www.ti.com SLOS710 – FEBRUARY 2011 CLASS V, AD TLC2201-SP Datasheet
Recommendation Recommendation Datasheet TLC2201-SP Datasheet




TLC2201-SP
TLC2201-SP
www.ti.com
SLOS710 FEBRUARY 2011
CLASS V, ADVANCED LinCMOSLOW NOISE PRECISION OPERATIONAL AMPLIFIER
Check for Samples: TLC2201-SP
FEATURES
1
23 QML-V Qualifed SMD 5962-9088203V2A
Low Input Offset Voltage: 400 μV Max
Excellent Offset Voltage Stability With
Temperature: 0.5 μV/°C Typ
Rail-to-Rail Output Swing
Low Input Bias Current: 1 pA Typ at TA = 25°C
Common-Mode Input Voltage Range Includes
the Negative Rail
Fully Specified For Both Single-Supply and
Split-Supply Operation
FK PACKAGE
(TOP VIEW)
3 2 1 20 19
NC 4
18 NC
IN- 5
17 VDD +
NC 6
16 NC
IN + 7
15 OUT
NC 8
14 NC
9 10 11 12 13
NC - No internal connection
DESCRIPTION
The TLC2201 is a precision, low-noise operational amplifier using Texas Instruments Advanced LinCMOS
process. This device combines the noise performance of the lowest-noise JFET amplifiers with the dc precision
available previously only in bipolar amplifiers. The Advanced LinCMOSprocess uses silicon-gate technology to
obtain input offset voltage stability with temperature and time that far exceeds that obtainable using metal-gate
technology. In addition, this technology makes possible input impedance levels that meet or exceed levels
offered by top-gate JFET and expensive dielectric-isolated devices.
The combination of excellent DC and noise performance with a common-mode input voltage range that includes
the negative rail makes these devices an ideal choice for high-impedance, low-level signal-conditioning
applications in either single-supply or split-supply configurations.
The device inputs and outputs are designed to withstand 100-mA surge currents without sustaining latch-up. In
addition, internal ESD-protection circuits prevent functional failures at voltages up to 2000 V as tested under
MIL-PRF-38535, Method 3015.2; however, care should be exercised in handling these devices as exposure to
ESD may result in degradation of the parametric performance.
The TLC2201 is characterized for operation over the full military temperature range of 55°C to 125°C.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
LinCMOS is a trademark of Texas Instruments.
2
Parts, PSpice are trademarks of MicroSim Corporation.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
© 2011, Texas Instruments Incorporated



TLC2201-SP
TLC2201-SP
SLOS710 FEBRUARY 2011
www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
TYPICAL EQUIVALENT
INPUT NOISE VOLTAGE
vs
FREQUENCY
60
VDD = 5 V
RS = 20
50 TA = 25°C
40
30
20
10
0
1 10 100 1 k 10 k
f - Frequency - Hz
TEMPERATURE
55°C to 125°C Tcase
ORDERING INFORMATION(1)
PACKAGE (2)
ORDERABLE PART NUMBER
20-pin FK
5962-9088203V2A
TOP-SIDE MARKING
5962-9088203V2A
TLC2201AMFKBQMLV
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
web site at www.ti.com.
(2) Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
2 Submit Documentation Feedback
Product Folder Link(s): TLC2201-SP
© 2011, Texas Instruments Incorporated







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)