TLC2262A

D Output Swing includes Both Supply Rails D Low Noise . . . 12 nV/√Hz Typ at f = 1 kHz D Low Input Bias Current . . . 1 pA Typ D Fully Specified for Both Single-Supply and Split-Supply Operation D Low Power . . . 500 µA Max D Common-Mode Input Voltage Range Includes Negative Rail TLC226x, TLC226xA Advanced LinCMOS RAIL-TO-RAIL OPERATIONAL AMPLIFIERS SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001 D Low Input Offset Voltage 950 µV Max at TA = 25°C (TLC2262A) D Macromodel Included D Performance Upgrade for the TS27M2/M4 and TLC27M2/M4 D Available in Q-Temp Automotive HighRel Automotive Applications Configuration Control/Print Support Qualification to Automotive Standards VVNn – Equivalent Input Noise Voltage – nnvV///HzHz description The TLC2262 and TLC2264 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC226x family offers a compromise between the micropower TLC225x and the ac performance of the TLC227x. It has low supply current for battery-powered applications, while still having adequate ac performance for applications that demand it. The noise performance has been dramatically improved over previous generations of CMOS amplifiers. Figure 1 depicts the low level of noise voltage for this CMOS amplifier, which has only 200 µA (typ) of supply current per amplifier. EQUIVALENT INPUT NOISE VOLTAGE vs FREQUENCY 60 VDD = 5 V RS =...