Document
Elektronische Bauelemente
DTA143EE/DTA143EUA/DTA143ECA / DTA143ESA
PNP Digital Transistors (Built-in Resistors)
FEATURES
* Built-in bias resistors enable the configuration of an inverter circuit without connecting input resistors (see equivalent circuit).
* Only the on/off confitions need to be set for operation, making device design easy.
* The bias resistors consis of thin-film resistors with compete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects.
PIN CONNENCTIONS AND MARKING
DTA143EE
SOT-523
Abbreviated symbol: 13
DTA143ESA
TO-92S
DDTTAC11413E4EUAUA
SOT-323
Abbreviated symbol: 13
DTA143ECA
SOT-23
Abbreviated symbol: 13
http://www.SeCoSGmbH.com
01-Jun-2002 Rev. A
Any changing of specification will not be informed individual
Page 1 of 2
Elektronische Bauelemente
DTA143EE/DTA143EUA/DTA143ECA / DTA143ESA
PNP Digital Transistors (Built-in Resistors)
Absolute maximum ratings(Ta=25℃)
Parameter
Symbol
E
Supply voltage Input voltage
Output current
Power dissipation
VCC VIN IO IC(MAX) Pd
150
Junction temperature
Tj
Storage temperature
Tstg
Electrical characteristics (Ta=25℃)
Parameter
Symbol
Min.
Input voltage
VI(off) VI(on)
-3
Output voltage
VO(on)
Input current
II
Output current
IO(off)
DC current gain
GI 30
Input resistance
R1 3.29
Resistance ratio
R2/R1
0.8
Transition frequency
fT
Typical Characteristics
Typ
4.7 1 250
Limits (DTA143E□ )
UA CA
-50 -30~10
-100 -100 200
150
-55~150
Unit
SA
V V
mA
300 mW
℃
℃
Max. -0.5
-0.3 -1.8 -0.5
6.11 1.2
Unit V V mA µA
KΩ
MHz
Conditions VCC=-5V ,IO=-100µA
VO=-0.3V ,IO=-20 mA
IO/II=-10mA/-0.5mA VI=-5V
VCC=-50V ,VI=0 VO=-5V ,IO=-10mA
VO=-10V ,IO=5mA,f=100MHz
http://www.SeCoSGmbH.com
01-Jun-2002 Rev. A
Any changing of specification will not be informed individual
Page 2 of 2
.