SURFACE MOUNT FAST SWITCHING RECTIFIER
ER2A THRU ER2J
UPM
SURFACE MOUNT FAST SWITCHING RECTIFIER
Voltage Range 50 to 600 Volts Current 2.0 Amperes
Features
...
Description
ER2A THRU ER2J
UPM
SURFACE MOUNT FAST SWITCHING RECTIFIER
Voltage Range 50 to 600 Volts Current 2.0 Amperes
Features
* Low forward voltage drop * Plastic material used carries Underwriters
Laboratory Classification 94V-O
* For surface mounted application
* Glass ppassivated junction chip * Built-in strain relief
* Superfast recovery times for high efficiency *High temperature soldering: 250OC / 10 seconds at terminals
DO-214AA(SMB)
.083(2.11) .075(1.91)
.185(4.70) .160(4.06)
.155(3.94) .130(3.30)
Mechanical Data
* Case: Molded plastic * Terminals: Solder plated * Polarity: Indicated by cathode band * Packing: 12mm tape * Weight: 0.093 gram
.096(2.44) .083(2.13)
.050(1.27) .030(0.76)
.012(0.31) .006(0.15)
.008 (.203)
MAX.
.220(5.59)
.200(5.08)
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25oC ambient temperature unless otherwise specifiedSingle phase, half wave, 60 Hz, resistive or inductive load.For capacitive load, derate current by 20%
Type Number
ER2A ER2B ER2C ER2D
Maximum Recurrent Peak Reverse Voltage
50 100 150 200
Maximum RMS Voltage
35 70 105 140
Maximum DC Blocking Voltage
50 100 150 200
Maximum Average Forward Rectified Current @ TL=110oC
2.0
Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method)
50.0
Maximum lnstantaneous Forward Voltage @ 2.0A
0.95
Maximum DC Reverse Current @ TA=25oC At Rated DC Blocking Voltage @ TA=100oC Maximum Reverse ...
Similar Datasheet