4Q Triac
BT234-800D
4Q Triac
Rev.01 - 11 July 2018
Product data sheet
1. General description
Planar passivated four quadrant tr...
Description
BT234-800D
4Q Triac
Rev.01 - 11 July 2018
Product data sheet
1. General description
Planar passivated four quadrant triac in a SOT78 (TO-220AB) plastic package intended for use in general purpose bidirectional switching and phase control applications, where high sensitivity is required in all four quadrants. This very sensitive gate "series D" triac is intended to be interfaced directly to microcontrollers, logic integrated circuits and other low power gate trigger circuits.
2. Features and benefits
Direct triggering from low power drivers and logic ICs High blocking voltage capability Low holding current for low current loads and lowest EMI at commutation Planar passivated for voltage ruggedness and reliability Triggering in all four quadrants Very sensitive gate for easy logic level triggering
3. Applications
General purpose motor controls General purpose switching
4. Quick reference data
Table 1. Quick reference data
Symbol Parameter
VDRM
repetitive peak off-state voltage
IT(RMS)
RMS on-state current
ITSM non-repetitive peak onstate current
Symbol Parameter
Static characteristics
IGT gate trigger current
Conditions
full sine wave; Tmb ≤ 110 °C; Fig. 1; Fig. 2; Fig. 3 full sine wave; Tj(init) = 25 °C; tp = 20 ms; Fig. 4; Fig. 5 Conditions
VD = 12 V; IT = 0.1 A; T2+ G+; Tj = 25 °C; Fig. 7 VD = 12 V; IT = 0.1 A; T2+ G-; Tj = 25 °C; Fig. 7 VD = 12 V; IT = 0.1 A; T2- G-; Tj = 25 °C; Fig. 7 VD = 12 V; IT = 0.1 A; T2- G+; Tj = 25 °C; Fig. 7
Min -
Ty...
Similar Datasheet