Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
TPS748
SBVS074L – JANUARY 2007 – ...
Product Folder
Order Now
Technical Documents
Tools & Software
Support & Community
TPS748
SBVS074L – JANUARY 2007 – REVISED MARCH 2017
TPS748 1.5-A Low-Dropout Linear
Regulator With Programmable Soft-Start
1 Features
1 VOUT Range: 0.8 V to 3.6 V Ultralow VIN Range: 0.8 V to 5.5 V VBIAS Range 2.7 V to 5.5 V Low Dropout: 60 mV Typical at 1.5 A, VBIAS = 5 V Power Good (PG) Output Allows Supply
Monitoring or Provides a Sequencing Signal for Other Supplies 2% Accuracy Over Line, Load, and Temperature Programmable Soft-Start Provides Linear Voltage Startup VBIAS Permits Low VIN Operation With Good Transient Response Stable With Any Output Capacitor ≥ 2.2 μF Available in a Small, 3-mm × 3-mm × 1-mm VSON-10 and 5 × 5 QFN-20 Packages
2 Applications
FPGA Applications DSP Core and I/O Voltages Post-Regulation Applications Applications With Special Start-up Time or
Sequencing Requirements Hot-Swap and Inrush Controls
Typical Application Circuit (Adjustable)
3 Description
The TPS748 low-dropout (LDO) linear
regulator provides an easy-to-use robust power management solution for a wide variety of applications. Userprogrammable soft-start minimizes stress on the input power source by reducing capacitive inrush current on start-up. The soft-start is monotonic and wellsuited for powering many different types of processors and ASICs. The enable input and power good output allow easy sequencing with external
regulators. This complete flexibility permits the use...