SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
UPM
1.5SMCJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Voltage Range 5.0-220 Volts Power 1500 Watts
Features
* ...
Description
UPM
1.5SMCJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Voltage Range 5.0-220 Volts Power 1500 Watts
Features
* For surface mounted applications in order to optimize board space. * Low profile package * Built-in strain relief * Glass passivated junction * Low inductance * Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
* High temperature soldering : 260¢XC /10 seconds at terminals * Pb free product are available : 99% Sn above can meet Rohs
environment substance directive request
DO-41
Mechanical Data
Case: JEDEC DO-214AB,Molded plastic over passivated junction. Terminals: Solder plated,solderable per MIL-STD-202G, Method 208 Polarity: Color band denotes positive end (cathode) Standard Packaging:16mm tape (EIA-481) Weight: 0.007 ounce, 0.021 gram
Devices For Bipolar Applications
For Bidirectional use C or CA Suffix for types 1.5SMCJ5.0 thru types 1.5SMCJ220. Electrical characteristics apply in both directions.
Maximum Ratings and Electrical Characteristics
Ratings at 25°C ambient temperature unless otherwise specified.Resistive or inductive load, 60Hz. For Capacitive load derate current by 20%
Rating
Peak Power Dissipation at T A=25 OC, TP 1ms(Note 1,2 ,Fig.1 ) Peak Forward Surge Current,8.3ms single half sine-wave superimposed on rated load (Note 2,3) Peak Pulse Current Current on 10/1000s waveform(Note 1,Fig.3 )
Operating Junction and StorageTemperature Range
Symbol
PPM
IFSM IP P M TJ,TS TG
Value 500 100
See Table 1 -55 to +150
U...
Similar Datasheet