Document
1N957 thru 1N984
Nominal Zener Voltage 6.8 to 91 Volts
Features
Silicon Planar Power Zener Diodes. Standard Zener voltage tolerance is ±5% for “A” suffix, and ±10% for “B” suffix . Other tolerances are available upon request.
Zener Diodes Power Dissipation 500mW
Mechanical Data
Case: DO-35 Glass Case Weight: approx. 0.13 gram
Maximum Ratings and Thermal Characteristics
(TA=25oC unless otherwise noted)
Parameter
Symbol
Value
Unit
Zener current (see Table "Characteristics")
Power dissipation at TL=25oC
Ptot
500 (1)
mW
Thermal resistance junction to ambient air
RθJA
300 (1)
oC/W
Junction temperature
Tj 175 oC
Storage temperature range
TS
-65 to +175
oC
Notes: 1. Valid provided that leads at a distance of 3/8" from case are kept at ambient temperature.
485
Electrical Characteristics
(TJ=25oC unless otherwise noted) Maximum VF=0.9V at IF=10mA
Type number
1N957B
Nominal zener voltage
V (3) Z
(Volts)
6.8
Test current
IZT (mA)
18.5
Maximum zener impedance (1)
ZZT @ IZT (Ω)
ZZK @ IZK (Ω)
IZK (mA)
4.5 700
1
Maximum regulator current
I (2)
ZM
(mA)
58
Maximum reverse current
IR Maximum (uA)
150
Test voltage Vdc (Volts)
5.2
1N958B
7.5
16.5 5.5 700 0.5
53
75 5.7
1N959B
8.2
15 6.5 700 0.5
47
50 6.2
1N960B
9.1
14 7.5 700 0.5
43
25 6.9
1N961B
10
12.5 8.5 700 0.25
40
10 7.6
1N962B
11
11.5 9.5 700 0.25
36
5 8.4
1N963B
12
10.5 11.5 700 0.25
32
5 9.1
1N964B
13
9.5 13 700 0.25
29
5 9.9
1N965B
15
8.5 16 700 0.25
27
5 11.4
1N966B
16
7.8 17 700 0.25
24
5 12.2
1N967B
18
7 21 750 0.25
21
5 13.7
1N968B
20
6.2 25 750 0.25
20
5 15.2
1N969B
22
5.6 29 750 0.25
18
5 16.7
1N970B
24
5.2 33 750 0.25
16
5 18.2
1N971B
27
4.6 41 750 0.25
14
5 20.6
1N972B
30
4.2
49
1000
0.25
13
5 22.8
1N973B
33
3.8
58
1000
0.25
12
5 25.1
1N974B
36
3.4
70
1000
0.25
11
5 27.4
1N975B
39
3.2
80
1000
0.25
10
5 29.7
1N976B
43
3
93
1500
0.25
9.2
5 32.7
1N977B
47
2.7 105 1500 0.25
8.5
5 35.8
1N978B
51
2.5 125 1500 0.25
7.8
5 38.8
1N979B
56
2.2 150 2000 0.25
6.9
5 42.6
1N980B
62
2.0 185 2000 0.25
6.3
5 47.1
1N981B
68
1.8 230 2000 0.25
5.7
5 51.7
1N982B
75
1.7 270 2000 0.25
5.2
5 56.0
1N983B
82
1.5 330 3000 0.25
4.7
5 62.2
1N984B
91
1.4
440
3000
0.25
4.3
5 69.2
Notes:
1. The Zener Impedance is derived from the 1 KHZ AC voltage which results when an AC current having an RMS value equal to 10% of the Zener current (IZT) is superimposed on IZT. Zener Impedance is measured at two points to insure a sharp knee on the breakdown curve and to eliminate unstable units.
2. Valid provided that leads at a distance of 3/8" from case are kept at 25oC ambient temperature. 3. Measured with device junction in thermal equilibrium.
486
.