DatasheetsPDF.com

LM258A-EP Dataheets PDF



Part Number LM258A-EP
Manufacturers Texas Instruments
Logo Texas Instruments
Description DUAL OPERATIONAL AMPLIFIERS
Datasheet LM258A-EP DatasheetLM258A-EP Datasheet (PDF)

www.ti.com FEATURES • Controlled Baseline – One Assembly/One Test Site, One Fabrication Site • Extended Temperature Performance of –55°C to 125°C • Enhanced Diminishing Manufacturing Sources (DMS) Support • Enhanced Product-Change Notification • Qualification Pedigree (1) • Wide Supply Range: – Single Supply . . . 3 V to 30 V – Dual Supplies . . . ±1.5 V to ±15 V • Low Supply-Current Drain, Independent of Supply Voltage . . . 0.7 mA Typ • Common-Mode Input Voltage Range Includes Ground, Allowing.

  LM258A-EP   LM258A-EP



Document
www.ti.com FEATURES • Controlled Baseline – One Assembly/One Test Site, One Fabrication Site • Extended Temperature Performance of –55°C to 125°C • Enhanced Diminishing Manufacturing Sources (DMS) Support • Enhanced Product-Change Notification • Qualification Pedigree (1) • Wide Supply Range: – Single Supply . . . 3 V to 30 V – Dual Supplies . . . ±1.5 V to ±15 V • Low Supply-Current Drain, Independent of Supply Voltage . . . 0.7 mA Typ • Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing Near Ground (1) Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold compound life. Such qualification testing should not be viewed as justifying use of this component beyond specified performance and environmental limits. LM258A-EP DUAL OPERATIONAL AMPLIFIERS SLOS506 – OCTOBER 2006 • Low Input Bias and Offset Parameters: – Input Offset Voltage . . . 2 mV Typ – Input Offset Current . . . 2 nA Typ – Input Bias Current . . . 15 nA Typ • Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage . . . 32 V • Open-Loop Differential Voltage Amplification . . . 100 V/mV Typ • Internal Frequency Compensation D PACKAGE (TOP VIEW) 1OUT 1IN– 1IN+ GND 1 2 3 4 8 VCC 7 2OUT 6 2IN– 5 2IN+ DESCRIPTION/ORDERING INFORMATION The LM258A consists of two independent, high-gain, frequency-compensated operational amplifiers designed to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 30 V, and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage. Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational amplifier circuits that now can be implemented more easily in single-supply-voltage systems. For example, this device can be operated directly from the standard 5-V supply used in digital systems and easily can provide the required interface electronics without additional ±5-V supplies. ORDERING INFORMATION TA –55°C to 125°C VIOmax AT 25°C 3mV MAX TESTED VCC 30V SOIC – D PACKAGE (1) Reel of 2500 ORDERABLE PART NUMBER LM258AMDREP TOP-SIDE MARKING 258AM (1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specificati.


LM2588 LM258A-EP E12009


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)