DatasheetsPDF.com

MSP430F6730A Dataheets PDF



Part Number MSP430F6730A
Manufacturers Texas Instruments
Logo Texas Instruments
Description Mixed-Signal Microcontrollers
Datasheet MSP430F6730A DatasheetMSP430F6730A Datasheet (PDF)

Product Folder Order Now Technical Documents Tools & Software Support & Community MSP430F6736A, MSP430F6735A, MSP430F6734A, MSP430F6733A MSP430F6731A, MSP430F6730A, MSP430F6726A, MSP430F6725A MSP430F6724A, MSP430F6723A, MSP430F6721A, MSP430F6720A SLASE46A – FEBRUARY 2015 – REVISED OCTOBER 2018 MSP430F673xA, MSP430F672xA Mixed-Signal Microcontrollers 1 Device Overview 1.1 Features 1 • Low Supply-Voltage Range: 3.6 V Down to 1.8 V • Ultra-Low Power Consumption – Active Mode (AM): All Syste.

  MSP430F6730A   MSP430F6730A


Document
Product Folder Order Now Technical Documents Tools & Software Support & Community MSP430F6736A, MSP430F6735A, MSP430F6734A, MSP430F6733A MSP430F6731A, MSP430F6730A, MSP430F6726A, MSP430F6725A MSP430F6724A, MSP430F6723A, MSP430F6721A, MSP430F6720A SLASE46A – FEBRUARY 2015 – REVISED OCTOBER 2018 MSP430F673xA, MSP430F672xA Mixed-Signal Microcontrollers 1 Device Overview 1.1 Features 1 • Low Supply-Voltage Range: 3.6 V Down to 1.8 V • Ultra-Low Power Consumption – Active Mode (AM): All System Clocks Active 265 µA/MHz at 8 MHz, 3.0 V, Flash Program Execution (Typical) 140 µA/MHz at 8 MHz, 3.0 V, RAM Program Execution (Typical) – Standby Mode (LPM3): Real-Time Clock (RTC) With Crystal, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wake up: 1.7 µA at 2.2 V, 2.5 µA at 3.0 V (Typical) – Off Mode (LPM4): Full RAM Retention, Supply Supervisor Operational, Fast Wake up: 1.6 µA at 3.0 V (Typical) – Shutdown RTC Mode (LPM3.5): Shutdown Mode, Active RTC With Crystal: 1.24 µA at 3.0 V (Typical) – Shutdown Mode (LPM4.5): 0.78 µA at 3.0 V (Typical) • Wake up From Standby Mode in 3 µs (Typical) • 16-Bit RISC Architecture, Extended Memory, up to 25-MHz System Clock • Flexible Power-Management System – Fully Integrated LDO With Programmable Regulated Core Supply Voltage – Supply Voltage Supervision, Monitoring, and Brownout – System Operation From up to Two Auxiliary Power Supplies • Unified Clock System – FLL Control Loop for Frequency Stabilization – Low-Power Low-Frequency Internal Clock Source (VLO) – Low-Frequency Trimmed Internal Reference Source (REFO) – 32-kHz Crystals (XT1) • One 16-Bit Timer With Three Capture/Compare Registers • Three 16-Bit Timers With Two Capture/Compare Registers Each • Enhanced Universal Serial Communication Interfaces (eUSCIs) – eUSCI_A0, eUSCI_A1, and eUSCI_A2 – Enhanced UART Supports Automatic BaudRate Detection – IrDA Encoder and Decoder – Synchronous SPI – eUSCI_B0 – I2C With Multiple Slave Addressing – Synchronous SPI • Password-Protected RTC With Crystal Offset Calibration and Temperature Compensation • Separate Voltage Supply for Backup Subsystem – 32-kHz Low-Frequency Oscillator (XT1) – Real-Time Clock – Backup Memory (4 × 16 Bits) • Three 24-Bit Sigma-Delta Analog-to-Digital Converters (ADCs) With Differential PGA Inputs • Integrated LCD Driver With Contrast Control for up to 320 Segments in 8-Mux Mode • Hardware Multiplier Supports 32-Bit Operations • 10-Bit 200-ksps ADC – Internal Reference – Sample-and-Hold, Autoscan Feature – Up to Six External Channels and Two Internal Channels, Including Temperature Sensor • Three-Channel Internal DMA • Serial Onboard Programming, No External Programming Voltage Needed • Device Comparison Summarizes the Available Family Members • Available in 100-Pin and 80-Pin LQFP Packages • Single-Phase Electronic Watt-Hour Meter Development Tool (Also See Tools and Software) – EVM430-F6736 - MSP430F6736 EVM for Metering – Energy Measurement Design Center for MSP430™ MCUs 1 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. MSP430F6736A, MSP430F6735A, MSP430F6734A, MSP430F6733A MSP430F6731A, MSP430F6730A, MSP430F6726A, MSP430F6725A MSP430F6724A, MSP430F6723A, MSP430F6721A, MSP430F6720A SLASE46A – FEBRUARY 2015 – REVISED OCTOBER 2018 www.ti.com 1.2 Applications • Single-Phase Electronic Watt-Hour Meters • Energy Monitoring • Utility Metering 1.3 Description The TI MSP family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The DCO allows the device to wake up from low-power modes to active mode in 3 µs (typical). The MSP430F673xA and MSP430F672xA devices are microcontrollers with high-performance 24-bit sigma-delta ADCs (three ADCs in MSP430F673xA and two ADCs in MSP430F672xA), a 10-bit ADC, four eUSCIs (three eUSCI_A modules and one eUSCI_B module), four 16-bit timers, a hardware multiplier, a DMA module, an RTC module with alarm capabilities, an LCD driver with integrated contrast control, an auxiliary supply system, and up to 72 I/O pins in the 100‑pin devices and 52 I/O pins in the 80‑pin devices. For complete module descriptions, see the MSP430F5xx and MSP430F6xx Family User's Guide. PART NUMBER Device Information(1) PACKAGE BODY SIZE(2) MSP430F6736AIPZ LQFP (100) 14 mm × 14 mm MSP430F6736AIPN LQFP (80) 12 mm × 12 mm (1) For the most current part, package, and ordering .


MSP430F6731A MSP430F6730A MSP430F6726A


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)