Value line ultra-low-power 32-bit MCU
STM32L010C6
Value line ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, 32-Kbyte Flash memory, 8-Kbyte SRAM, 256-byte...
Description
STM32L010C6
Value line ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, 32-Kbyte Flash memory, 8-Kbyte SRAM, 256-byte EEPROM, ADC
Datasheet - production data
Features
Ultra-low-power platform – 1.8 V to 3.6 V power supply – –40 to 85 °C temperature range – 0.23 µA Standby mode (2 wakeup pins) – 0.35 µA Stop mode (16 wakeup lines) – 0.6 µA Stop mode + RTC + 8-Kbyte RAM retention – Down to 76 µA/MHz in Run mode – 5 µs wakeup time (from Flash memory) – 41 µA 12-bit ADC conversion at 10 ksps
Core: Arm® 32-bit Cortex®-M0+ – From 32 kHz to 32 MHz – 0.95 DMIPS/MHz
Reset and supply management
– Ultra-low-power BOR (brownout reset) with 5 selectable thresholds
– Ultra-low-power POR/PDR
Clock sources – 0 to 32 MHz external clock – 32 kHz oscillator for RTC with calibration – High-speed internal 16 MHz factory-trimmed RC (±1%) – Internal low-power 37 kHz RC – Internal multispeed low-power 65 kHz to 4.2 MHz RC – PLL for CPU clock
Pre-programmed bootloader – USART, SPI supported
Development support – Serial wire debug supported
38 fast I/Os (31 I/Os 5-Volt tolerant)
Memories – 32-Kbyte Flash memory – 8-Kbyte RAM – 256 bytes of data EEPROM – 20-byte backup register – Sector protection against R/W operation
LQFP48 7 x 7 mm
Analog peripherals – 12-bit ADC 1.14 Msps up to 10 channels (down to 1.8 V)
7-channel DMA controller, supporting ADC, SPI, I2C, USART and timers
4x peripherals communication interface 1x USART, 1x LPUART (low power) 1x SPI 16 Mbit/s 1x I2C...
Similar Datasheet