SN74LV04A-Q1 Hex Inverter Datasheet

SN74LV04A-Q1 Datasheet, PDF, Equivalent


Part Number

SN74LV04A-Q1

Description

Hex Inverter

Manufacture

etcTI

Total Page 12 Pages
Datasheet
Download SN74LV04A-Q1 Datasheet


SN74LV04A-Q1
SN74LV04A-Q1
HEX INVERTER
D Qualified for Automotive Applications
D ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
D 2-V to 5.5-V VCC Operation
D Max tpd of 6.5 ns at 5 V
D Typical VOLP (Output Ground Bounce)
<0.8 V at VCC = 3.3 V, TA = 25°C
D Typical VOHV (Output VOH Undershoot)
>2.3 V at VCC = 3.3 V, TA = 25°C
D Support Mixed-Mode Voltage Operation on
All Ports
D Ioff Supports Partial-Power-Down Mode
Operation
SCLS514C − JULY 2003 − REVISED FEBRUARY 2008
PW PACKAGE
(TOP VIEW)
1A
1Y
2A
2Y
3A
3Y
GND
1
2
3
4
5
6
7
14 VCC
13 6A
12 6Y
11 5A
10 5Y
9 4A
8 4Y
description/ordering information
This hex inverter is designed for 2-V to 5.5-V VCC operation.
The SN74LV04A contains six independent inverters. This device performs the Boolean function Y = A.
The device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,
preventing damaging current backflow through the device when it is powered down.
ORDERING INFORMATION
TA
PACKAGE
ORDERABLE
PART NUMBER
TOP-SIDE
MARKING
−40°C to 105°C TSSOP − PW Tape and reel SN74LV04ATPWRQ1 LV04AT
For the most current package and ordering information, see the Package Option Addendum at the end
of this document, or see the TI web site at http://www.ti.com.
Package drawings, thermal data, and symbolization are available at http://www.ti.com/packaging.
FUNCTION TABLE
(each inverter)
INPUT OUTPUT
AY
HL
LH
logic diagram, each inverter (positive logic)
AY
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright 2008, Texas Instruments Incorporated
1

SN74LV04A-Q1
SN74LV04A-Q1
HEX INVERTER
SCLS514C − JULY 2003 − REVISED FEBRUARY 2008
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V
Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V
Voltage range applied to any output in the high-impedance
or power-off state, VO (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to 7 V
Output voltage range, VO (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −0.5 V to VCC + 0.5 V
Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −20 mA
Output clamp current, IOK (VO < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −50 mA
Continuous output current, IO (VO = 0 to VCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25 mA
Continuous current through VCC or GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA
Package thermal impedance, θJA(see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113°C/W
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed.
2. This value is limited to 5.5 V maximum.
3. The package thermal impedance is calculated in accordance with JESD 51-7.
recommended operating conditions (see Note 4)
MIN MAX UNIT
VCC Supply voltage
2 5.5 V
VCC = 2 V
1.5
VIH High-level input voltage
VCC = 2.3 V to 2.7 V
VCC = 3 V to 3.6 V
VCC × 0.7
VCC × 0.7
V
VCC = 4.5 V to 5.5 V
VCC × 0.7
VCC = 2 V
0.5
VIL Low-level input voltage
VCC = 2.3 V to 2.7 V
VCC = 3 V to 3.6 V
VCC × 0.3
VCC × 0.3
V
VCC = 4.5 V to 5.5 V
VCC × 0.3
VI Input voltage
0 5.5 V
VO Output voltage
0
VCC
V
VCC = 2 V
−50 µA
IOH High-level output current
VCC = 2.3 V to 2.7 V
VCC = 3 V to 3.6 V
−2
−6 mA
VCC = 4.5 V to 5.5 V
−12
VCC = 2 V
50 µA
IOL Low-level output current
VCC = 2.3 V to 2.7 V
VCC = 3 V to 3.6 V
2
6 mA
VCC = 4.5 V to 5.5 V
12
VCC = 2.3 V to 2.7 V
200
t/v Input transition rise or fall rate
VCC = 3 V to 3.6 V
100 ns/V
VCC = 4.5 V to 5.5 V
20
TA Operating free-air temperature
−40 105 °C
NOTE 4: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report,
Implications of Slow or Floating CMOS Inputs, literature number SCBA004.
2 POST OFFICE BOX 655303 DALLAS, TEXAS 75265


Features SN74LV04A-Q1 HEX INVERTER D Qualified f or Automotive Applications D ESD Protec tion Exceeds 2000 V Per MIL-STD-883, Me thod 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0) D 2-V to 5.5- V VCC Operation D Max tpd of 6.5 ns at 5 V D Typical VOLP (Output Ground Bounc e) <0.8 V at VCC = 3.3 V, TA = 25°C D Typical VOHV (Output VOH Undershoot) >2 .3 V at VCC = 3.3 V, TA = 25°C D Suppo rt Mixed-Mode Voltage Operation on All Ports D Ioff Supports Partial-Power-Dow n Mode Operation SCLS514C − JULY 200 3 − REVISED FEBRUARY 2008 PW PACKAGE (TOP VIEW) 1A 1Y 2A 2Y 3A 3Y GND 1 2 3 4 5 6 7 14 VCC 13 6A 12 6Y 11 5A 10 5Y 9 4A 8 4Y description/ordering info rmation This hex inverter is designed f or 2-V to 5.5-V VCC operation. The SN74 LV04A contains six independent inverter s. This device performs the Boolean fun ction Y = A. The device is fully specif ied for partial-power-down applications using Ioff. The Ioff circuitry disable s the outputs, preventing damaging current backflow through the devic.
Keywords SN74LV04A-Q1, datasheet, pdf, etcTI, Hex, Inverter, N74LV04A-Q1, 74LV04A-Q1, 4LV04A-Q1, SN74LV04A-Q, SN74LV04A-, SN74LV04A, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)