NCV360

NCP360, NCV360 USB Positive Overvoltage Protection Controller with Internal PMOS FET and Status FLAG The NCP360 disconnects systems at its output when wrong VBUS operating conditions are detected at its input. The system is positive overvoltage protected up to +20 V. Thanks to an integrated PMOS FET, no external device is necessary, reducing the system cost and the PCB area of the application board. The NCP360 is able to instantaneously disconnect the output from the input if the input voltage exceeds the overvoltage threshold (OVLO). The NCP360 provides a negative going flag (FLAG) output, which alerts the system that a fault has occurred. In addition, the device has ESD−protected input (15 kV Air) when bypassed with a 1 mF or larger capacitor. Features Very Fast Protection, Up to 20 V, with 25 mA Current Consumption On−chip PMOS Transistor Overvoltage Lockout (OVLO) Undervoltage Lockout (UVLO) Alert FLAG Output EN Enable Pin Thermal Shutdown Compliance to IEC61000−4−2 (Level 4) 8 kV (Contact) 15 kV (Air) ESD Ratings: Machine Model = B ESD Ratings: Human Body Model = 2 6 Lead UDFN 2x2 mm Package 5 Lead TSOP 3x3 mm Package NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable These are Pb−Free Devices Applications USB Devices Mobile Phones Peripheral Personal Digital Applications MP3 Players http://onsemi.com MARKING DIAGRAMS UDFN6 MU SUFFIX CASE 517AB...