NCV5104

NCP5104, NCV5104 High Voltage, Half Bridge Driver The NCP5104 is a High Voltage Power gate Driver providing two outputs for direct drive of 2 N−channel power MOSFETs or IGBTs arranged in a half−bridge configuration. It uses the bootstrap technique to insure a proper drive of the High−side power switch. Features High Voltage Range: up to 600 V dV/dt Immunity ±50 V/nsec Gate Drive Supply Range from 10 V to 20 V High and Low Drive Outputs Output Source / Sink Current Capability 250 mA / 500 mA 3.3 V and 5 V Input Logic Compatible Up to VCC Swing on Input Pins Extended Allowable Negative Bridge Pin Voltage Swing to −10 V for Signal Propagation Matched Propagation Delays between Both Channels 1 Input with Internal Fixed Dead Time (520 ns) Under VCC LockOut (UVLO) for Both Channels Pin to Pin Compatible with Industry Standards NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant Typical Applications Half−Bridge Power Converters www.onsemi.com 1 SOIC−8 D SUFFIX CASE 751 MARKING DIAGRAMS 8 P5104 ALYW G 1 1 PDIP−8 P SUFFIX CASE 626 NCP5104 AWL YYWWG NCP5104 A L or WL Y or YY W or WW G or G = Specific Device Code = Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package PINOUT INFORMATION VCC IN SD GND 18 27 36 45 VBOOT DRV_HI BRIDGE DRV_LO 8 Pin Package ORDERING INFORMATION ...