Automotive High-Voltage Switcher
NCV1072, NCV1075, NCV1076, NCV1077
Automotive High-Voltage
Switcher for Low Power
SMPS
The NCV107x products integrat...
Description
NCV1072, NCV1075, NCV1076, NCV1077
Automotive High-Voltage
Switcher for Low Power
SMPS
The NCV107x products integrate a fixed frequency current mode controller with a 670 V MOSFET. Available in a PDIP−7 package, the NCV107x offer a high level of integration, including soft−start, frequency−jittering, short−circuit protection, skip−cycle, a maximum peak current set point, ramp compensation, and a Dynamic
www.onsemi.com
MARKING DIAGRAM
Self−Supply (eliminating the need for an auxiliary winding). Unlike other monolithic solutions, the NCV107x is quiet by nature:
during nominal load operation, the part switches at one of the available frequencies (65, 100 or 130 kHz). When the output power demand diminishes, the IC automatically enters frequency foldback mode and provides excellent efficiency at light loads. When the power demand reduces further, it enters into a skip mode to reduce the standby consumption down to a no load condition.
Protection features include: a timer to detect an overload or a short−circuit event, Overvoltage Protection with auto−recovery and AC input line voltage detection.
For improved standby performance, the connection of an auxiliary winding stops the DSS operation and helps to reduce input power consumption below 50 mW at high line.
Features
Built−in 670 V MOSFET with RDS(on) of 4.7 W (NCV1076/77) /
11 W (NCV1072/75)
Large Creepage Distance Between High−voltage Pins
Current−Mode Fixed Frequency Operation – 65 / 100 / 130 kHz
PDIP−7 P SUFFIX...
Similar Datasheet