RRO Digital-to-Analog Converter
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
DAC121S101, DAC121S101-Q1
SNAS...
Description
Product Folder
Sample & Buy
Technical Documents
Tools & Software
Support & Community
DAC121S101, DAC121S101-Q1
SNAS265J – JUNE 2005 – REVISED SEPTEMBER 2015
DAC121S101/-Q1 12-Bit Micro Power, RRO Digital-to-Analog Converter
1 Features
1 DAC121S101-Q1 is AEC-Q100 Grade 1 Qualified and is Manufactured on an Automotive Grade Flow.
Ensured Monotonicity Low Power Operation Rail-to-Rail Voltage Output Power-on Reset to Zero Volts Output Wide Temperature Range of −40°C to +125°C Wide Power Supply Range of 2.7 V to 5.5 V Small Packages Power Down Feature Key Specifications
– 12-Bit Resolution – DNL -0.15, +0.25 LSB (Typical) – 8-µs Output Settling Time (Typical) – 4-mV Zero Code Error (Typical) – Full-Scale Error at −0.06 %FS (Typical) – 0.64-mW (3.6-V) / 1.43-mW (5.5-V) Normal
Mode Power Consumption (Typical) – 0.14-µW (3.6-V) / 0.39-µW (5.5-V) Power-
Down Mode (Typical)
2 Applications
Battery-Powered Instruments Digital Gain and Offset Adjustment Programmable Voltage and Current Sources Programmable Attenuators Automotive
3 Description
The DAC121S101 device is a full-featured, generalpurpose, 12-bit voltage-output digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes just 177 µA of current at 3.6 V. The on-chip output amplifier allows rail-torail output swing and the three wire serial interface operates at clock rates up to 30 MHz over the specified supply voltage range and is compatible with standard...
Similar Datasheet