Monolithic bus driver
L9637
Monolithic bus driver with ISO 9141 interface
Features
■ Operating power supply voltage range 4.5 V VS 36 V (...
Description
L9637
Monolithic bus driver with ISO 9141 interface
Features
■ Operating power supply voltage range 4.5 V VS 36 V (40 V for transients)
■ Reverse supply (battery) protected down to VS -24 V
■ Standby mode with very low current consumption ISSB 1 mA @ VCC 0.5 V
■ Low quiescent current in off condition ISOFF = 120 µA
■ TTL compatible TX input
■ Bidirectional K-I/O pin with supply voltage dependent input threshold
■ Overtemperature shut down function Selective to K-I/O pin
■ Wide input and output voltage range -24 V VK VS
■ K output current limitation, typ. IK = 60 mA ■ Defined OFF output status in undervoltage
condition and VS or GND interruption ■ Controlled output slope for low EMI
SO8
■ High input impedance for open VS or GND connection
■ Defined output ON status of LO or RX for open LI or K inputs
■ Defined K output OFF for TX input open ■ Integrated pull up resistors for TX, RX and LO ■ EMI robustness optimized
Description
The L9637 is a monolithic integrated circuit containing standard ISO 9141 compatible interface functions.
Table 1. Device summary
Order code
Package
L9637D
L9637D013TR E-L9637D(1)
E-L9637D013TR(1)
SO8 SO8 SO8 SO8
1. Device in ECOPACK® package (see Section 4: Package information on page 13).
Packing Tube
Tape and reel Tube
Tape and reel
September 2013
Doc ID 1765 Rev 8
1/15
www.st.com
15
Contents
Contents
L9637
1 Block diagram and pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Block diagram . ...
Similar Datasheet