current-mode PWM controller
UC1843-SP
www.ti.com
QML CLASS V, CURRENT-MODE PWM CONTROLLER
Check for Samples: UC1843-SP
SLUS981 – MARCH 2010
FEAT...
Description
UC1843-SP
www.ti.com
QML CLASS V, CURRENT-MODE PWM CONTROLLER
Check for Samples: UC1843-SP
SLUS981 – MARCH 2010
FEATURES
1
QML-V Qualified, SMD 5962-86704 Rad-Tolerant: 50 kRad (Si) TID (ELDRS Free) (1) Controlled Baseline Optimized For Off-line and DC-to-DC
Converters Low Start-Up Current (<1 mA) Automatic Feed Forward Compensation Pulse-by-Pulse Current Limiting Enhanced Load Response Characteristics Under-Voltage Lockout With Hysteresis Double Pulse Suppression High Current Totem Pole Output Internally Trimmed Bandgap Reference 500-kHz Operation Low RO Error Amp
xxx
(1) Radiation tolerance is a typical value based upon initial device qualification with dose rate = 10 mrad/sec. Radiation Lot Acceptance Testing is available - contact factory for details.
JG PACKAGE (TOP VIEW)
COMP V
FB
I SENSE
R /C TT
1 2 3 4
8V REF
7V CC
6 OUTPUT 5 GROUND
DESCRIPTION
The UC1843 family of control devices provides the necessary features to implement off-line or dc-to-dc fixed frequency current mode control schemes with a minimal external parts count. Internally implemented circuits include under-voltage lockout featuring start up current less than 1 mA, a precision reference trimmed for accuracy at the error amp input, logic to insure latched operation, a PWM comparator which also provides current limit control, and a totem pole output stage designed to source or sink high peak current. The output stage, suitable for driving N-Channel MOSFETs, is low in th...
Similar Datasheet