Low-Noise Amplifier. MMA036AA Datasheet


MMA036AA Amplifier. Datasheet pdf. Equivalent


Part Number

MMA036AA

Description

DC to 65GHz Broadband MMIC Low-Noise Amplifier

Manufacture

Microsemi

Total Page 7 Pages
Datasheet
Download MMA036AA Datasheet


MMA036AA
MMA036AA
DC to 65GHz Broadband MMIC
Low-Noise Amplifier with PLFX
Features
Integrated PLFX technology:
Allows use of less-expensive coil
Very low power dissipation:
4.5V, 85mA (383mW)
High drain efficiency (38dBm/W)
Great 0.04-50GHz performance:
10.5 ± 1.25dB gain
14.5dBm Psat, 11dBm P1dB
5dB noise figure
>30dB dynamic gain control
Integrated temperature-referenced
power detector output
100% DC, RF, and visually tested
Size: 1640x920um (64.6x36.2mil)
ECCN 3A001.b.2.d
Description
The MMA036AA is a seven stage
traveling wave amplifier. The amplifier
features Microsemi PLFX (Passive Low
Frequency eXtension) circuitry designed
to reduce the integration cost of the amplifier.
PLFX isolates the amplifier from bias
inductor resonances, allowing use
of a less-expensive coil.
Application
The MMA036AA Broadband MMIC Low-Noise
Amplifier with PLFX is designed for high
efficiency and low-noise broadband
applications in RF and microwave
communications, test equipment and
military systems. By using specific external
components, the bandwidth of operation
can be extended below 40MHz.
Key Characteristics: Vdd=4.5V, Idd=85mA, Zo=50Ω
Specifications pertain to wafer measurements with RF probes and DC bias cards @ 25°C
Parameter
Description
S21 (dB)
Small Signal Gain
Flatness (±dB)
Gain Flatness
S11 (dB)
Input Match
S22 (dB)
Output Match
S12 (dB)
Reverse Isolation
P1dB (dBm) 1dB Compressed Output Power
Psat (dBm)
Saturated Output Power
NF (dB)
Noise Figure
RFdet (mV/mW)
RF Detector Sensitivity
1.5 - 40GHz
Min Typ Max
9.5 11
-
- 0.5 1.25
- -15 -12
- -15 -12
- -20 -17
11.5 13 -
14 15.5 -
- 4.5 -
- 0.5 -
0.04 - 50GHz
Min Typ Max
9.5 10.5 -
- 1.25 1.75
- -15 -12
- -12 -10
- -18 -15
9.5 11
-
- 14.5 -
-5-
- 0.5 -
0.04 - 65GHz
Min Typ Max
8 10 -
- 1.5 2.0
- -11 -9
- -12 -9
- -16 -13
---
---
---
---
SMD-00152 RevD
Subject to Change Without Notice
1 of 6

MMA036AA
Typical Performance
MMA036AA
S21 Noise Frequency
Typical IC performance measured on-wafer
S11, S22
Typical IC performance with package de-embedded
S12
Typical IC performance measured on-wafer
Output Power
Typical IC performance measured on-wafer
SMD-00152 RevD
Subject to Change Without Notice
Typical IC performance measured on-wafer
Group Delay
Typical IC performance measured on-wafer
2 of 6


Features MMA036AA DC to 65GHz Broadband MMIC Low- Noise Amplifier with PLFX Features • Integrated PLFX technology: ▪ Allows use of less-expensive coil • Very lo w power dissipation: ▪ 4.5V, 85mA (38 3mW) ▪ High drain efficiency (38dBm/W ) • Great 0.04-50GHz performance: ▪ 10.5 ± 1.25dB gain ▪ 14.5dBm Psat, 11dBm P1dB ▪ 5dB noise figure • >30 dB dynamic gain control • Integrated temperature-referenced power detector o utput • 100% DC, RF, and visually tes ted • Size: 1640x920um (64.6x36.2mil) • ECCN 3A001.b.2.d Description The MMA036AA is a seven stage traveling wav e amplifier. The amplifier features Mic rosemi PLFX (Passive Low Frequency eXte nsion) circuitry designed to reduce the integration cost of the amplifier. PLF X isolates the amplifier from bias indu ctor resonances, allowing use of a less -expensive coil. Application The MMA036 AA Broadband MMIC Low-Noise Amplifier w ith PLFX is designed for high efficienc y and low-noise broadband applications in RF and microwave communications, test equipment an.
Keywords MMA036AA, datasheet, pdf, Microsemi, DC, to, 65GHz, Broadband, MMIC, Low-Noise, Amplifier, MA036AA, A036AA, 036AA, MMA036A, MMA036, MMA03, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)