PHOTOCOUPLER
TOSHIBA PHOTOCOUPLER IRLED & PHOTO-IC
TLX9376
TLX9376
HEV (Hybrid Electric Vehicle) and EV (Electric Vehicle) Applica...
Description
TOSHIBA PHOTOCOUPLER IRLED & PHOTO-IC
TLX9376
TLX9376
HEV (Hybrid Electric Vehicle) and EV (Electric Vehicle) Applications
Unit: mm
The Toshiba TLX9376 consists of an infrared LED and integrated high gain, high-speed photodetector. The TLX9376 is housed in the SO6 package. It has a totem-pole output that can both sink and source current. The photodetector has an internal Faraday shield that provides a guaranteed common-mode transient immunity of 15 kV/μs. TLX9376 guarantees minimum and maximum of propagation delay time, switching speed dispersion, and high common mode transient immunity.
Input current logic LOW output
: 4.0 mA (max)
Switching Speed
: tpHL = 35 ns (max)
: tpLH = 35 ns (max)
Common mode transient immunity : 15kV/μs (min)
Operating Temperature
: -40 to 125°C
Isolation voltage
: 3750 Vrms (min)
AEC-Q101 qualified
JEDEC
―
JEITA
―
TOSHIBA
11-4L1
Weight: 0.08 g (typ.)
Pin Configuration
1: ANODE 3: CATHODE 4: GND 5: VO 6: VCC
Truth Table
Input H L
LED ON OFF
M1 OFF ON
M2 ON OFF
Output L H
Schematic
IF 1+
3-
ICC VCC
IO 6
VO 5
SHIELD
GND 4
A ceramic capacitor (0.1 μF) should be connected from pin 6 (VCC) to pin 4 (GND) to stabilize the operation of the high gain linear amplifier. Failure to provide the bypass may impair the switching property. The total lead length between capacitor and coupler should not exceed 1 cm.
© 2019 Toshiba Electronic Devices & Storage Corporation
1
2019-06-28
TLX9376
Absolute Maximum Ratings...
Similar Datasheet