TOSHIBA Photocoupler IRLED & Photo-Transistor
TLX9300
Various Controllers Signal transmission between different circui...
TOSHIBA Photocoupler IRLED & Photo-
Transistor
TLX9300
Various Controllers Signal transmission between different circuit potential HEV (Hybrid Electric Vehicle) and
EV (Electric Vehicle) Applications
TLX9300
Unit: mm
The TOSHIBA TLX9300 mini-flat photocoupler is suitable for surface-mount assembly. The TLX9300 consists of an infrared LED optically coupled to a photo-
transistor. This photocoupler can be used to the extensive applications.
It is generic speed
transistor output.
Collector-emitter voltage: 40 V (min) Current transfer ratio: 100% (min) to 900%(max) Isolation voltage: 3750 Vrms (min) AEC-Q101 qualified
Pin Configuration
1
3 RBE
1: Anode 3: Cathode 4: Emitter 6: Collector
6 4
JEDEC JEITA TOSHIBA
― ― 11-4M1S
Weight: 0.08 g (typ.)
© 2019 Toshiba Electronic Devices & Storage Corporation
1
2019-06-28
TLX9300
Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25°C)
Characteristic
Symbol
Rating
Unit
Forward current
IF 30 mA
Forward current (Ta=125 °C)
IF 18 mA
Forward current derating(Ta ≥ 108 °C)
ΔIF/°C
-0.7 mA/°C
LED
Pulse forward current
(Note 1)
IFP
1A
Input Power Dissipation
PD 50 mW
Input Power Dissipation Derating (Ta ≥ 50°C)
ΔPD/°C
-0.5 mW/°C
Reverse voltage
VR 5 V
Collector-emitter voltage
VCEO 40 V
Detector
Emitter-collector voltage
VECO 5 V
Collector current
IC 50 mA
Collector power dissipation
PC 150 mW
Collector power dissipation derating (Ta ≥ 50 °C)
ΔPC/°C
-1.5 mW/°C
Operating tempera...