Quad Low-Side Relay Driver
NCV7750
Quad Low-Side Relay Driver
The NCV7750 is an automotive four channel low−side driver providing drive capability...
Description
NCV7750
Quad Low-Side Relay Driver
The NCV7750 is an automotive four channel low−side driver providing drive capability up to 600 mA per channel. Output control is via a SPI port and offers convenient reporting of faults for open load (or short to ground), overload, and overtemperature conditions. Additionally, parallel control of the outputs is addressable (in pairs) via the INx pins.
A dedicated limp−home mode pin (LHI) enables OUT1−OUT4. Each output driver is protected for overload current and includes an output clamp for inductive loads. The NCV7750 is available in a SSOP−24 fused lead package.
Features
4 Low−Side Channels 600 mA Low−Side Drivers
♦ RDS(on) 1.1 W (Typ), 2.2 W (Max)
16−bit SPI Control
♦ Frame Error Detection (8−bit) ♦ Daisy Chain Capable
Parallel Input Pins for PWM operation Power Up Without Open Circuit Detection Active (for LED
applications)
Low Quiescent Current in Sleep and Standby Modes Limp Home Functionality 3.3 V and 5 V compatible Digital Input Supply Range Fault Reporting
♦ Open Load Detection (selectable) ♦ Overload ♦ Overtemperature
Power−on Reset (VDD, VDDA) SSOP−24 Package (internally fused leads) NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable
These are Pb−Free Devices
Applications
Automotive Body Control Unit Automotive Engine Control Unit Relay Drive LED Drive Stepper Motor Driver
www.onsemi.com
MARKING DIAGRAM
...
Similar Datasheet