Document
PYTHON 1.3/0.5/0.3 MegaPixels Global Shutter CMOS Image Sensors
DATA SHEET www.onsemi.com
NOIP1SN1300A
FEATURES
• Size Options:
♦ PYTHON 300: 640 x 480 Active Pixels, 1/4” Optical Format
♦ PYTHON 500: 800 x 600 Active Pixels, 1/3.6” Optical Format
♦ PYTHON 1300: 1280 x 1024 Active Pixels, 1/2” Optical Format
• Data Output Options:
♦ P1−SN/SE/FN: 4 LVDS Data Channels
Figure 1. PYTHON 1300
♦ P2−SN/SE: 10 bit Parallel
♦ P3−SN/SE/FN: 2 LVDS Data Channels
• 4.8 mm x 4.8 mm Low Noise Global Shutter Pixels with
In-pixel CDS
• Monochrome (SN), Color (SE) and NIR (FN) • Zero Row Overhead Time (ZROT) Mode Enabling
Higher Frame Rate
APPLICATIONS
• Machine Vision • Motion Monitoring • Security • Barcode Scanning (2D)
• Frame Rate at Full Resolution, 4 LVDS Data Channels
(P1−SN/SE/FN only) ♦ 210/165 frames per second @ SXGA
(ZROT/NROT) ♦ 545/385 frames per second @ SVGA
(ZROT/NROT) ♦ 815/545 frames per second @ VGA (ZROT/NROT)
• Frames Rate at Full Resolution (CMOS)
♦ 50/43 Frames per Second @ SXGA (ZROT/NROT)
• On−chip 10−bit Analog−to−Digital Converter (ADC) • Four/Two/One LVDS High Speed Serial Outputs or
DESCRIPTION The PYTHON 300, PYTHON 500, and PYTHON 1300
image sensors utilize high sensitivity 4.8 mm x 4.8 mm pixels that support low noise “pipelined” and “triggered” global shutter readout modes. The sensors support correlated double sampling (CDS) readout, reducing noise and increasing dynamic range.
The image sensors have on−chip programmable gain amplifiers and 10−bit A/D converters. The integration time and gain parameters can be reconfigured without any visible image artifact. Optionally the on−chip automatic exposure
Parallel CMOS Output
control loop (AEC) controls these parameters dynamically.
• Random Programmable Region of Interest (ROI)
The image’s black level is either calibrated automatically or
Readout
can be adjusted by adding a user programmable offset.
• Serial Peripheral Interface (SPI) • Automatic Exposure Control (AEC) • Phase Locked Loop (PLL) • High Dynamic Range (HDR) Modes Possible • Dual Power Supply (3.3 V and 1.8 V) • −40°C to +85°C Operational Temperature Range
A high level of programmability using a four wire serial peripheral interface enables the user to read out specific regions of interest. Up to eight regions can be programmed, achieving even higher frame rates.
The image data interface of the P1−SN/SE/FN devices consists of four LVDS lanes, enabling frame rates up to 210 frames per second in Zero ROT mode for the
• 48−pin LCC • Power Dissipation:
♦ 620 mW (P1, 4 LVDS, ZROT) ♦ 420 mW (P1, P3, 2 LVDS, NROT) ♦ 270 mW (P1, P3, 1 LVDS, NROT) ♦ 420 mW (P2, ZROT)
• These Devices are Pb−Free and are RoHS Compliant
PYTHON 1300. Each channel runs at 720 Mbps. A separate synchronization channel containing payload information is provided to facilitate the image reconstruction at the receiving end. The P2−SN/SE devices provide a parallel CMOS output interface at reduced frame rate. The P3−SN/SE/FN devices are the same as the P1−SN/SE/FN but with only two of the four LVDS data channels enabled, facilitating frame rates of 90 frames per second in Normal
ROT for the PYTHON 1300.
© Semiconductor Components Industries, LLC, 2016
1
August, 2021 − Rev. 6
Publication Order Number: NOIP1SN1300A/D
NOIP1SN1300A
The devices are provided in a 48−pin LCC package and are available in monochrome, Bayer color, and extended near−infrared (NIR) configurations.
ORDERING INFORMATION
Part Number
Description
PYTHON 1300
NOIP1SN1300A−QDI
1.3 Megapixel, Monochrome, LVDS Output
NOIP1SE1300A−QDI
1.3 Megapixel, Bayer Color, LVDS Output
NOIP1FN1300A−QDI
1.3 Megapixel, Monochrome with enhanced NIR, LVDS Output
NOIP2SN1300A−QDI
1.3 Megapixel, Monochrome, CMOS (parallel) Output
NOIP2SE1300A−QDI
1.3 Megapixel, Bayer Color, CMOS (parallel) Output
NOIP1SN1300A−QTI
1.3 Megapixel, Monochrome, LVDS Output, Protective Foil
NOIP1SE1300A−QTI
1.3 Megapixel, Bayer Color, LVDS Output, Protective Foil
NOIP1FN1300A−QTI
1.3 Megapixel, Monochrome with enhanced NIR, LVDS Output, Protective Foil
NOIP3SN1300A−QDI
1.3 Megapixel, 2 LVDS Outputs, Monochrome
NOIP3FN1300A−QDI
1.3 Megapixel, 2 LVDS Outputs, NIR enhanced Monochrome
NOIP3SE1300A−QDI
1.3 Megapixel, 2 LVDS Outputs, Color
NOIP3SN1300A−QTI
1.3 Megapixel, 2 LVDS Outputs, Monochrome, Protective Foil
NOIP3FN1300A−QTI
1.3 Megapixel, 2 LVDS Outputs, NIR enhanced Monochrome, Protective Foil
NOIP3SE1300A−QTI
1.3 Megapixel, 2 LVDS Outputs, Color, Protective Foil
PYTHON 500
NOIP1SN0500A−QDI
0.5 Megapixel, Monochrome, LVDS Output
NOIP1SE0500A−QDI
0.5 Megapixel, Bayer Color, LVDS Output
NOIP1FN0500A−QDI
0.5 Megapixel, Monochrome with enhanced NIR, LVDS Output
NOIP1SN0500A−QTI
0.5 Megapixel, Monochrome, LVDS Output, Protective Foil
NOIP1SE0500A−QTI
0.5 Meg.