Analog Switch. TS5A23157-Q1 Datasheet


TS5A23157-Q1 Switch. Datasheet pdf. Equivalent


Part Number

TS5A23157-Q1

Description

Dual SPDT Analog Switch

Manufacture

etcTI

Total Page 22 Pages
Datasheet
Download TS5A23157-Q1 Datasheet


TS5A23157-Q1
TS5A23157-Q1
www.ti.com
SCDS252A – JULY 2007 – REVISED FEBRUARY 2013
DUAL 15-SPDT ANALOG SWITCH
Check for Samples: TS5A23157-Q1
FEATURES
1
• Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following
Results:
– Device Temperature Grade 1: –40ºC to
125ºC
– Device HBM ESD Classification Level H2
– Device CDM ESD Classification Level C4B
• Customer-Specific Configuration Control Can
Be Supported Along With Major-Change
Approval
• Specified Break-Before-Make Switching
• Low ON-State Resistance (15 )
• Control Inputs Are 5-V Tolerant
• Low Charge Injection
• Excellent ON-Resistance Matching
• Low Total Harmonic Distortion
• 1.8-V to 5.5-V Single-Supply Operation
APPLICATIONS
• Sample-and-Hold Circuits
• Battery-Powered Equipment
• Audio and Video Signal Routing
• Communication Circuits
IN1 1
NO1 2
GND 3
NO2 4
IN2 5
10 COM1
9 NC1
8 V+
7 NC2
6 COM2
DESCRIPTION
The TS5A23157 is a dual, single-pole, double-throw (SPDT) analog switch designed to operate from 1.65 V to
5.5 V. This device can handle both digital and analog signals. The device can transmit signals up to 5.5 V (peak)
in either direction.
For the most current package and ordering information, see the Package Option Addendum at the end of this
document, or see the TI Web site at www.ti.com.
Table 1. FUNCTION TABLE
INPUT NC TO COM, NO TO COM,
IN COM TO NC COM TO NO
L ON
OFF
H OFF
ON
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2013, Texas Instruments Incorporated

TS5A23157-Q1
TS5A23157-Q1
SCDS252A – JULY 2007 – REVISED FEBRUARY 2013
Table 2. SUMMARY OF CHARACTERISTICS
Configuration
Number of channels
ron
Δron
ron(flat)
tON
tOFF
tBBM
Charge injection
Bandwidth
OFF isolation
Crosstalk
Total harmonic distortion
ICOM(off)/INC(OFF)
Package option
2:1 Multiplexer and
Demultiplexer
(2 × SPDT)
2
15
0.15
4
8.7 ns
6.8 ns
0.5 ns
7 pC
220 MHz
–65 dB at 10 MHz
–66 dB at 10 MHz
0.01%
±1 μA
10-pin DGS
www.ti.com
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
V+
VNC
VNO
VCOM
II/OK
INC
INO
ICOM
VIN
IIK
θJA
Tstg
ESD
Supply voltage range(2)
Analog voltage range(2) (3) (4)
Analog port diode current
VNC, VNO, VCOM < 0 or VNC, VNO, VCOM > V+
On-state switch current
VNC, VNO, VCOM = 0 to V+
Digital input voltage range(2) (3)
Digital input clamp current
Continuous current through V+ or GND
Package thermal impedance(5)
Storage temperature range
Electrostatic discharge rating
VIN < 0
Human-body model H2
Charged-device model C4B
MIN MAX UNIT
–0.5 6.5 V
–0.5 V+ + 0.5
±50
V
mA
±50 mA
–0.5 6.5 V
–50 mA
±100 mA
165.36 °C/W
–65 150 °C
2 kV
750 V
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltages are with respect to ground, unless otherwise specified.
(3) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(4) This value is limited to 5.5 V maximum.
(5) The package thermal impedance is calculated in accordance with JESD 51-7.
2 Submit Documentation Feedback
Copyright © 2007–2013, Texas Instruments Incorporated
Product Folder Links: TS5A23157-Q1


Features TS5A23157-Q1 www.ti.com SCDS252A – J ULY 2007 – REVISED FEBRUARY 2013 DUA L 15-Ω SPDT ANALOG SWITCH Check for S amples: TS5A23157-Q1 FEATURES 1 • Qu alified for Automotive Applications • AEC-Q100 Qualified With the Following Results: – Device Temperature Grade 1 : –40ºC to 125ºC – Device HBM ESD Classification Level H2 – Device CDM ESD Classification Level C4B • Custo mer-Specific Configuration Control Can Be Supported Along With Major-Change Ap proval • Specified Break-Before-Make Switching • Low ON-State Resistance ( 15 Ω) • Control Inputs Are 5-V Tole rant • Low Charge Injection • Excel lent ON-Resistance Matching • Low To tal Harmonic Distortion • 1.8-V to 5. 5-V Single-Supply Operation APPLICATION S • Sample-and-Hold Circuits • Batt ery-Powered Equipment • Audio and Vid eo Signal Routing • Communication Cir cuits IN1 1 NO1 2 GND 3 NO2 4 IN2 5 1 0 COM1 9 NC1 8 V+ 7 NC2 6 COM2 DESCRIP TION The TS5A23157 is a dual, single-pole, double-throw (SPDT) analog switch designed to operate from 1.65 V .
Keywords TS5A23157-Q1, datasheet, pdf, etcTI, Dual, SPDT, Analog, Switch, S5A23157-Q1, 5A23157-Q1, A23157-Q1, TS5A23157-Q, TS5A23157-, TS5A23157, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)