ANALOG SWITCH. TS5A1066 Datasheet


TS5A1066 SWITCH. Datasheet pdf. Equivalent


Part Number

TS5A1066

Description

SPST ANALOG SWITCH

Manufacture

etcTI

Total Page 30 Pages
Datasheet
Download TS5A1066 Datasheet


TS5A1066
TS5A1066
www.ti.com
SCDS185C – JANUARY 2005 – REVISED SEPTEMBER 2012
10-SPST ANALOG SWITCH
Check for Samples: TS5A1066
FEATURES
1
• Low ON-State Resistance (10 )
• Control Inputs Are 5.5-V Tolerant
• Low Charge Injection
• Low Total Harmonic Distortion (THD)
• 1.65-V to 5.5-V Single-Supply Operation
• Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
• ESD Performance Tested Per JESD 22
– 2000-V Human-Body Model
(A114-B, Class II)
– 1000-V Charged-Device Model (C101)
DBV OR DCK PACKAGE
(TOP VIEW)
NO 1
COM 2
GND 3
5 V+
4 IN
YZP PACKAGE
(BOTTOM VIEW)
GND 3
COM 2
NO 1
4 IN
5 V+
DESCRIPTION/ORDERING INFORMATION
The TS5A1066 is a single-pole single-throw (SPST) analog switch that is designed to operate from 1.65 V to
5.5 V. This device can handle both digital and analog signals, and signals up to V+ (peak) can be transmitted in
either direction.
Table 1. SUMMARY OF CHARACTERISTICS
Configuration
Number of channels
ON-state resistance (ron)
ON-state resistance flatness (ron(flat))
Turn-on/turn-off time (tON/tOFF)
Charge injection (QC)
Bandwidth (BW)
OFF isolation (OISO)
Total harmonic distortion (THD)
Leakage current (ICOM(OFF)
Power-supply current (I+)
Package options
Single-Pole,
Single-Throw Demultiplexer
(1 × SPST)
1
7.5
2.5
9.5 ns/2 ns
1 pC
400 MHz
–68 dB at 10 MHz
0.14%
±0.1 μA
0.05 μA
5-pin DSBGA, SOT-23,
or SC-70
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005–2012, Texas Instruments Incorporated

TS5A1066
TS5A1066
SCDS185C – JANUARY 2005 – REVISED SEPTEMBER 2012
www.ti.com
Table 2. ORDERING INFORMATION
TA
–40°C to 85°C
PACKAGE (1)
NanoFree™ – WCSP (DSBGA)
0.23-mm Large Bump – YZP (Pb-
free)
SOT (SOT-23) – DBV
Tape and reel
Tape and reel
ORDERABLE PART NUMBER
TS5A1066YZPR
TS5A1066DBVR
SOT (SC-70) – DCK
Tape and reel TS5A1066DCKR
TOP-SIDE MARKING(2)
JD_
JAD_
JD_
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
(2) DBV/DCK: The actual top-side marking has one additional character that designates the assembly/test site.
YZP: The actual top-side marking has three preceding characters to denote year, month, and sequence code, and one following
character to designate the assembly/test site. Pin 1 identifier indicates solder-bump composition (1 = SnPb, • = Pb-free).
FUNCTION TABLE
IN
NO TO COM,
COM TO NO
L OFF
H ON
Absolute Minimum and Maximum Rating(1) (2)
over operating free-air temperature range (unless otherwise noted)
V+
VNO
VCOM
IK
INO
ICOM
VI
IIK
I+
IGND
Supply voltage range(3)
Analog voltage range(3) (4) (5)
Analog port diode current
On-state switch current
Digital input voltage range(3) (4)
Digital input clamp current
Continuous current through each V+ or GND
θJA Package thermal impedance(6)
VNO, VCOM < 0 or VNO, VCOM > V+
VNO, VCOM = 0 to V+
VI < 0
DBV package
DCK package
YZP package
MIN
–0.5
–0.5
–50
–50
–0.5
–50
–100
MAX
6.5
V+ + 0.5
50
50
6.5
100
206
252
132
UNIT
V
V
mA
mA
V
mA
mA
°C/W
Tstg Storage temperature range
–65 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum.
(3) All voltages are with respect to ground, unless otherwise specified.
(4) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(5) This value is limited to 5.5 V maximum.
(6) The package thermal impedance is calculated in accordance with JESD 51-7.
2 Submit Documentation Feedback
Product Folder Links: TS5A1066
Copyright © 2005–2012, Texas Instruments Incorporated


Features TS5A1066 www.ti.com SCDS185C – JANUA RY 2005 – REVISED SEPTEMBER 2012 10- SPST ANALOG SWITCH Check for Samples : TS5A1066 FEATURES 1 • Low ON-State Resistance (10 Ω) • Control Inputs Are 5.5-V Tolerant • Low Charge Inje ction • Low Total Harmonic Distortion (THD) • 1.65-V to 5.5-V Single-Suppl y Operation • Latch-Up Performance Ex ceeds 100 mA Per JESD 78, Class II • ESD Performance Tested Per JESD 22 – 2000-V Human-Body Model (A114-B, Class II) – 1000-V Charged-Device Model (C1 01) DBV OR DCK PACKAGE (TOP VIEW) NO 1 COM 2 GND 3 5 V+ 4 IN YZP PACKAGE ( BOTTOM VIEW) GND 3 COM 2 NO 1 4 IN 5 V+ DESCRIPTION/ORDERING INFORMATION Th e TS5A1066 is a single-pole single-thro w (SPST) analog switch that is designed to operate from 1.65 V to 5.5 V. This device can handle both digital and anal og signals, and signals up to V+ (peak) can be transmitted in either direction . Table 1. SUMMARY OF CHARACTERISTICS Configuration Number of channels ON-state resistance (ron) ON-state resistance flatness .
Keywords TS5A1066, datasheet, pdf, etcTI, SPST, ANALOG, SWITCH, S5A1066, 5A1066, A1066, TS5A106, TS5A10, TS5A1, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)