TS5A4595 ANALOG SWITCH Datasheet

TS5A4595 Datasheet, PDF, Equivalent


Part Number

TS5A4595

Description

5-V/3.3-V SINGLE-CHANNEL ANALOG SWITCH

Manufacture

etcTI

Total Page 22 Pages
Datasheet
Download TS5A4595 Datasheet


TS5A4595
www.ti.com
TS5A4595
W SPST ANALOG SWITCH
5ĆV/3.3ĆV SINGLEĆCHANNEL ANALOG SWITCH
SCDS180 − FEBRUARY 2005
Description
The TS5A4595 is a single-pole single-throw (SPST)
analog switch that is designed to operate from 2 V to
5.5 V. This device can handle both digital and analog
signals, and signals up to V+ can be transmitted in either
direction.
Applications
D Sample-and-Hold Circuit
D Battery-Powered Equipment
(Cellular Phones, PDAs)
D Audio and Video Signal Routing
D Communication Circuits
D PCMCIA Cards
SOT-23 OR SC-70 PACKAGE
(TOP VIEW)
COM 1
NC 2
GND 3
5 V+
4 IN
FUNCTION TABLE
IN
NC TO COM,
COM TO NC
L ON
H OFF
Features
D Low ON-State Resistance (8 W)
D ON-State Resistance Flatness (1.5 W)
D Control Inputs Are 5.5-V Tolerant
D Low Charge Injection (5 pC Max)
D 450-MHz −3-dB Bandwidth at 255C
D Low Total Harmonic Distortion (THD) (0.04%)
D 2-V to 5.5-V Single-Supply Operation
D −82-dB OFF-Isolation at 1 MHz
D Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
D 0.5-nA Max OFF Leakage
D ESD Performance Tested Per JESD 22
− 2000-V Human-Body Model
(A114-B, Class II)
− 1000-V Charged-Device Model (C101)
D TTL/CMOS-Logic Compatible
Summary of Characteristics
V+ = 5 V, TA = 25°C
Configuration
Single Pole
Single Throw
(SPST)
Number of channels
1
ON-state resistance (ron)
ON-state resistance flatness (ron(flat))
Turn-on/turn-off time (tON/tOFF)
Charge injection (QC)
Bandwidth (BW)
8
1.5
17 ns/14 ns
5 pC
450 MHz
OFF isolation (OISO)
Total harmonic distortion (THD)
−82 dB at 1 MHz
0.04%
Leakagecurrent(ICOM(OFF)/INC(OFF))
Power-supply current (I+)
Package option
±0.5 nA
0.25 µA
5-pin SOT-23 or SC-70
ORDERING INFORMATION
TA
PACKAGE(1)
ORDERABLE PART NUMBER
TOP-SIDE MARKING(2)
−40°C to 85°C
SOT (SOT-23) − DBV
SOT (SC−70) − DCK
Tape and reel
Tape and reel
TS5A4595DBVR
TS5A4595DCKR
JSB_
JT_
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.
(2) DBV/DCK: The actual top-side marking has one additional character that designates the assembly/test site.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright 2005, Texas Instruments Incorporated

TS5A4595
TS5A4595
W SPST ANALOG SWITCH
5ĆV/3.3ĆV SINGLEĆCHANNEL ANALOG SWITCH
SCDS180 − FEBRUARY 2005
Pin Configurations
Available in Other Pin Configurations
www.ti.com
COM 1
NC 2
GND 3
5 V+
4 IN
TS5A4595
COM 1
NO 2
GND 3
5 V+
4 IN
TS5A4594
IN 1
COM 2
GND 3
5 V+
4 NO
IN 1
COM 2
GND 3
5 V+
4 NC
TS5A4596
TS5A4597
Absolute Minimum and Maximum Ratings(1)(2)
over operating free-air temperature range (unless otherwise noted)
MIN MAX UNIT
V+
VNC
VCOM
Supply voltage range(3)
Analog voltage range(3)(4)
−0.3
6
−0.3 V+ + 0.3
V
V
IK
INC
ICOM
VI
IIK
I+
IGND
Analog port diode current
On-state switch current
Digital input voltage range(3)(4)
Digital input clamp current
Continuous current through V+
Continuous current through GND
θJA Package thermal impedance(5)
VNC, VCOM < 0
VNC, VCOM = 0 to V+
VI < 0
DBV package
DCK package
−50
−20
−0.3
−50
−100
mA
20 mA
6V
mA
100 mA
mA
206
°C/W
252
Tstg Storage temperature range
−65 150 °C
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade
device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified
is not implied.
(2) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
(3) All voltages are with respect to ground, unless otherwise specified.
(4) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(5) The package thermal impedance is calculated in accordance with JESD 51-7.
2


Features www.ti.com TS5A4595 8ĆW SPST ANALOG SW ITCH 5ĆV/3.3ĆV SINGLEĆCHANNEL ANALOG SWITCH SCDS180 − FEBRUARY 2005 Desc ription The TS5A4595 is a single-pole s ingle-throw (SPST) analog switch that i s designed to operate from 2 V to 5.5 V . This device can handle both digital a nd analog signals, and signals up to V+ can be transmitted in either direction . Applications D Sample-and-Hold Circui t D Battery-Powered Equipment (Cellular Phones, PDAs) D Audio and Video Signal Routing D Communication Circuits D PCM CIA Cards SOT-23 OR SC-70 PACKAGE (TOP VIEW) COM 1 NC 2 GND 3 5 V+ 4 IN FU NCTION TABLE IN NC TO COM, COM TO NC L ON H OFF Features D Low ON-State R esistance (8 W) D ON-State Resistance F latness (1.5 W) D Control Inputs Are 5. 5-V Tolerant D Low Charge Injection (5 pC Max) D 450-MHz −3-dB Bandwidth at 255C D Low Total Harmonic Distortion (T HD) (0.04%) D 2-V to 5.5-V Single-Suppl y Operation D −82-dB OFF-Isolation at 1 MHz D Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II D 0.5-.
Keywords TS5A4595, datasheet, pdf, etcTI, 5-V/3.3-V, SINGLE-CHANNEL, ANALOG, SWITCH, S5A4595, 5A4595, A4595, TS5A459, TS5A45, TS5A4, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)