12V MOSFET Driver
FEATURES
All-in-one synchronous buck driver Bootstrapped high-side drive One PWM signal generates both drives Anticross-...
Description
FEATURES
All-in-one synchronous buck driver Bootstrapped high-side drive One PWM signal generates both drives Anticross-conduction protection circuitry Output disable control turns off both MOSFETs to float
output per Intel® VRM 10 specification
APPLICATIONS
Multiphase desktop CPU supplies Single-supply synchronous buck converters
Dual Bootstrapped, 12 V MOSFET Driver with Output Disable
ADP3110
GENERAL DESCRIPTION
The ADP3110 is a dual, high voltage MOSFET driver optimized for driving two N-channel MOSFETs, which are the two switches in a nonisolated synchronous buck power converter. Each of the drivers is capable of driving a 3000 pF load with a 25 ns propagation delay and a 30 ns transition time. One of the drivers can be bootstrapped and is designed to handle the high voltage slew rate associated with floating high-side gate drivers. The ADP3110 includes overlapping drive protection to prevent shoot-through current in the external MOSFETs.
The OD pin shuts off both the high-side and the low-side MOSFETs to prevent rapid output capacitor discharge during system shutdown.
The ADP3110 is specified over the commercial temperature range of 0°C to 85°C and is available in an 8-lead SOIC_N package.
SIMPLIFIED FUNCTIONAL BLOCK DIAGRAM
12V
ADP3110
IN 2
VCC 4
DELAY
OD 3
CMP 1V
DELAY
CMP
VCC 6
CONTROL LOGIC
Figure 1.
D1
BST 1
CBST1 DRVH 8
CBST2
RG Q1
SW 7
RBST
TO INDUCTOR
DRVL 5
PGND 6
Q2
05514-001
©2010 SCILLC. All rights reserved. May 2010 – Rev. 2
Publicatio...
Similar Datasheet