DS90CR584 LVDS Datasheet

DS90CR584 Datasheet, PDF, Equivalent


Part Number

DS90CR584

Description

LVDS

Manufacture

etcTI

Total Page 13 Pages
Datasheet
Download DS90CR584 Datasheet


DS90CR584
OBSOLETE
DS90CR583, DS90CR584
www.ti.com
SNLS110B – JULY 1997 – REVISED APRIL 2013
DS90CR583/DS90CR584 LVDS 24-Bit Color Flat Panel Display (FPD) Link— 65 MHz
Check for Samples: DS90CR583, DS90CR584
FEATURES
1
2 20 to 65 MHz Shift clk Support
• Up to 227 Mbytes/s Bandwidth
• Cable Size is Reduced to Save Cost
• 290 mV Swing LVDS Devices for Low EMI
• Low Power CMOS Design (< 550 mW typ)
• Power-Down Mode Saves Power (< 0.25 mW)
• PLL Requires No External Components
• Low Profile 56-lead TSSOP Package
• Rising Edge Data Strobe
• Compatible with TIA/EIA-644 LVDS Standard
• Single Pixel Per Clock XGA (1024 x 768)
• Supports VGA, SVGA, XGA and Higher
• 1.8 Gbps Throughput
DESCRIPTION
The DS90CR583 transmitter converts 28 bits of
CMOS/TTL data into four LVDS (Low Voltage
Differential Signaling) data streams. A phase-locked
transmit clock is transmitted in parallel with the data
streams over a fifth LVDS link. Every cycle of the
transmit clock 28 bits of input data are sampled and
transmitted. The DS90CR584 receiver converts the
LVDS data streams back into 28 bits of CMOS/TTL
data. At a transmit clock frequency of 65 MHz, 24 bits
of RGB data and 4 bits of LCD timing and control
data (FPLINE, FPFRAME, DRDY, CONTROL) are
transmitted at a rate of 455 Mbps per LVDS data
channel. Using a 65 MHz clock, the data throughput
is 227 Mbytes per second. These devices are offered
with rising edge data strobes for convenient interface
with a variety of graphics and LCD panel controllers.
This chipset is an ideal means to solve EMI and
cable size problems associated with wide, high speed
TTL interfaces.
BLOCK DIAGRAM
Figure 1. DS90CR583
See Package Number DGG
Figure 2. DS90CR584
See Package Number DGG
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1997–2013, Texas Instruments Incorporated

DS90CR584
DS90CR583, DS90CR584
SNLS110B – JULY 1997 – REVISED APRIL 2013
OBSOLETE
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings(1)(2)
Supply Voltage (VCC)
CMOS/TTL Input Voltage
CMOS/TTL Output Voltage
LVDS Receiver Input Voltage
LVDS Driver Output Voltage
LVDS Output Short Circuit Duration
Junction Temperature
Storage Temperature
Lead Temperature (Soldering, 4 sec)
Maximum Power Dissipation @ 25°C
DGG (TSSOP) Package:
Package Derating:
This device does not meet 2000V ESD rating(3) .
DS90CR583
DS90CR584
DS90CR583
DS90CR584
0.3V to +6V
0.3V to (VCC + 0.3V)
0.3V to (VCC + 0.3V)
0.3V to (VCC + 0.3V)
0.3V to (VCC + 0.3V)
Continuous
+150°C
65°C to +150°C
+260°C
1.63W
1.61W
12.5 mW/°C above +25°C
12.4 mW/°C above +25°C
(1) “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be ensured. They are not meant to imply
that the device should be operated at these limits. “Electrical Characteristics” specify conditions for device operation.
(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.
(3) ESD Rating: HBM (1.5 kΩ, 100 pF) PLL V CC 1000V All other pins 2000V EIAJ (0Ω, 200 pF) 150V
Recommended Operating Conditions
Supply Voltage (VCC)
Operating Free Air Temperature (TA)
Receiver Input Range
Supply Noise Voltage (VCC)
Min Nom Max
4.75 5.0 5.25
10 +25 +70
0 2.4
100
Units
V
°C
V
mVP-P
ELECTRICAL CHARACTERISTICS
over opeOver recommended operating supply and temperature ranges unless otherwise specifiedrating free-air temperature
range (unless otherwise noted)
Symb
Parameter
Conditions
Min Typ Max Units
CMOS/TTL DC SPECIFICATIONS
VIH High Level Input Voltage
2.0
VCC
V
2 Submit Documentation Feedback
Copyright © 1997–2013, Texas Instruments Incorporated
Product Folder Links: DS90CR583 DS90CR584


Features OBSOLETE DS90CR583, DS90CR584 www.ti.c om SNLS110B – JULY 1997 – REVISED APRIL 2013 DS90CR583/DS90CR584 LVDS 24 -Bit Color Flat Panel Display (FPD) Lin k— 65 MHz Check for Samples: DS90CR58 3, DS90CR584 FEATURES 1 •2 20 to 65 MHz Shift clk Support • Up to 227 Mby tes/s Bandwidth • Cable Size is Reduc ed to Save Cost • 290 mV Swing LVDS D evices for Low EMI • Low Power CMOS D esign (< 550 mW typ) • Power-Down Mod e Saves Power (< 0.25 mW) • PLL Requi res No External Components • Low Prof ile 56-lead TSSOP Package • Rising Ed ge Data Strobe • Compatible with TIA/ EIA-644 LVDS Standard • Single Pixel Per Clock XGA (1024 x 768) • Supports VGA, SVGA, XGA and Higher • 1.8 Gbps Throughput DESCRIPTION The DS90CR583 transmitter converts 28 bits of CMOS/TT L data into four LVDS (Low Voltage Diff erential Signaling) data streams. A pha se-locked transmit clock is transmitted in parallel with the data streams over a fifth LVDS link. Every cycle of the transmit clock 28 bits of input data are sampled and tra.
Keywords DS90CR584, datasheet, pdf, etcTI, LVDS, S90CR584, 90CR584, 0CR584, DS90CR58, DS90CR5, DS90CR, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)