A4935 Automotive 3-Phase MOSFET Driver
FEATURES AND BENEFITS
▪ High current 3-phase gate drive for N-channel MOSFETs ▪ ...
A4935 Automotive 3-Phase MOSFET Driver
FEATURES AND BENEFITS
▪ High current 3-phase gate drive for N-channel MOSFETs ▪ Cross-conduction protection with adjustable dead time ▪ Top-off charge pump for 100% PWM ▪ Charge pump for low supply voltage operation ▪ Uncommitted current sense amplifier ▪ 5.5 to 50 V supply voltage range ▪ Compatible with 3.3 V and 5 V logic ▪ Extensive diagnostic outputs ▪ Low-current sleep mode
PACKAGE: 48-pin LQFP with exposed thermal pad (suffix JP)
DESCRIPTION
The A4935 is a 3-phase controller for use with N-channel external power MOSFETs and is specifically designed for automotive applications.
A unique charge pump
regulator provides full (>10 V) gate drive for battery voltages down to 7 V and allows the A4935 to operate with a reduced gate drive, down to 5.5 V.
A bootstrap capacitor is used to provide the above-battery supply voltage required for N-channel MOSFETs. An internal charge pump for the high-side drive allows DC (100% duty cycle) operation.
Full control over all six power FETs in the 3-phase bridge is provided, allowing motors to be driven with block commutation or sinusoidal excitation. The power FETs are protected from shoot-through by integrated crossover control and resistoradjustable dead time.
Bridge current can be measured using an integrated current sense amplifier. This is an uncommitted differential amplifier with a below-ground common mode range allowing it to be used in low-side current sense applications. Gain and offset a...