2048k Nonvolatile SRAM
19-5631; Rev 11/10
www.maxim-ic.com
FEATURES
10 years minimum data retention in the absence of external power
Data ...
Description
19-5631; Rev 11/10
www.maxim-ic.com
FEATURES
10 years minimum data retention in the absence of external power
Data is automatically protected during power loss
Unlimited write cycles Low-power CMOS operation Read and write access times of 70 ns Lithium energy source is electrically
disconnected to retain freshness until power is applied for the first time Full ± 10% VCC operating range (DS1249Y) Optional ± 5% VCC operating range (DS1249AB) Optional industrial temperature range of -40°C to +85°C, designated IND JEDEC standard 32-pin DIP package
DS1249Y/AB 2048k Nonvolatile SRAM
PIN ASSIGNMENT
NC A16 A14 A12
A7 A6 A5 A4 A3 A2 A1
A0
DQ0
DQ1 DQ2
GND
1 2 3 4 5 6 7 8 9 10 11 12
13
14
15
16
32 VCC 31 A15 30 A17 29 WE 28 A13 27 A8 26 A9 25 A11 24 OE 23 A10 22 CE 21 DQ7
20 DQ6
19 DQ5
18 DQ4
17 DQ3
32-Pin ENCAPSULATED PACKAGE 740-mil EXTENDED
PIN DESCRIPTION
A0 - A17
- Address Inputs
DQ0 - DQ7
- Data In/Data Out
CE - Chip Enable
WE - Write Enable
OE - Output Enable
VCC GND
- Power (+5V) - Ground
NC - No Connect
DESCRIPTION
The DS1249 2048k Nonvolatile SRAMs are 2,097,152-bit, fully static, nonvolatile SRAMs organized as 262,144 words by 8 bits. Each NV SRAM has a self-contained lithium energy source and control circuitry which constantly monitors VCC for an out-of-tolerance condition. When such a condition occurs, the lithium energy source is automatically switched on and write protection is unconditionally enabled to prevent data corruption. Ther...
Similar Datasheet