High-Bandwidth LTE/WCDMA PA Power Management
EVALUATION KIT AVAILABLE
MAX77178 / MAX77179
High-Bandwidth LTE/WCDMA PA Power Management ICs in a 1.75mm x 1.4mm, 0.4m...
Description
EVALUATION KIT AVAILABLE
MAX77178 / MAX77179
High-Bandwidth LTE/WCDMA PA Power Management ICs in a 1.75mm x 1.4mm, 0.4mm Pitch WLP
General Description
The MAX77178/MAX77179 step-down converters are optimized for powering the power amplifier (PA) in multimode/multiband handsets for 3G/4G applications such as LTE, WCDMA, as well as other RF PA applications such as Wi-FiM and WiMAXM.
The 2.5V to 5.5V input supply range supports both current and future battery chemistries. The MAX77179 uses an analog input driven by an external DAC to control the output voltage linearly for continuous PA power adjustment. The output voltage range (0.5V to VIN) supports operation with a wide variety of PAs. The MAX77178 uses a 2-bit GPIO interface with four selectable output voltage options to control the output voltage supply for PA power adjustment.
Fast switching frequency (8MHz, typ) allows the use of low value inductor and small ceramic output capacitors while maintaining low-ripple voltage. Efficiency is enhanced at light loads by switching to skip mode where the converter switches only as needed to service the load. Adaptive smart FET scaling further improves efficiency under all operating conditions.
Other features include overcurrent and overtemperature protection, and a very low-current (0.1µA, typ) shutdown mode.
WiMAX is a registered certification mark and service mark of WiMAX Forum.
Wi-Fi is a registered certification mark of Wi-Fi Alliance Corporation.
Features
S Meet 3G/4G Timin...
Similar Datasheet