DatasheetsPDF.com

MAX2550 Dataheets PDF



Part Number MAX2550
Manufacturers Maxim Integrated
Logo Maxim Integrated
Description WCDMA Femtocell Transceiver
Datasheet MAX2550 DatasheetMAX2550 Datasheet (PDF)

EVALUATION KIT AVAILABLE MAX2550 Band I, V, and VIII WCDMA Femtocell Transceiver with GSM Monitoring General Description The MAX2550 is a complete single-chip RF-to-bits and bits-to-RF radio transceiver. This device is in compliance with the 3GPP TS25.104 femtocell standard for Band I, V, and VIII. It is equipped with multiple receive inputs and transmit outputs for low band, high band, and macro-cell monitoring (Table 1). This fully integrated transceiver facilitates compact radio designs for.

  MAX2550   MAX2550



Document
EVALUATION KIT AVAILABLE MAX2550 Band I, V, and VIII WCDMA Femtocell Transceiver with GSM Monitoring General Description The MAX2550 is a complete single-chip RF-to-bits and bits-to-RF radio transceiver. This device is in compliance with the 3GPP TS25.104 femtocell standard for Band I, V, and VIII. It is equipped with multiple receive inputs and transmit outputs for low band, high band, and macro-cell monitoring (Table 1). This fully integrated transceiver facilitates compact radio designs for dongle and standalone femtocell products by minimizing external component count. Maxim’s MAX-PHY serial interface is used to drastically reduce IC pin count, while worldwide field-proven architecture accelerates time to product deployment. The device features unparalleled receive blocker performance and the industry’s lowest noise figure for higher data rates and range. Low-power operational modes are available to minimize power consumption. The transmitter is designed to deliver EVM far exceeding the standard requirement at 0dBm. The MAX2550–MAX2553 is a family of pin-compatible transceivers that cover all major WCDMA and cdma2000® bands. All parts are controlled by a 4-wire interface. The MAX2550 is packaged in a compact 7mm x 7mm TQFN and specified over the -40NC to +85NC extended temperature range. A complete radio reference design is available to facilitate cFusutonmcdteisoignnsa. l Diagrams Applications WCDMA Band I, V, and VIII Femtocells Ordering Information and Simplified Block Diagram appear at end of data sheet. For related parts and recommended products to use with this part, refer to www.maxim-ic.com/MAX2550.related. Benefits and Features S Single-Chip Femtocell Radio Transceiver S WCDMA/HSPA+ Band I, V, and VIII Operation S TS25.104 Standard Compliant S Multiple LNA Inputs for WCDMA, PCS, and GSM Macrocell Monitoring S High Level of Integration  On-Chip Fractional-N Frequency Synthesizers for LO Generation  No Tx SAW Filters Required  Integrated PA Drivers for Lower-Cost Power Amplifier Designs  12-Bit AFC DAC to Control TCXO  On-Chip Temperature Sensor  Three General-Purpose Outputs  Reference Clock with Selectable CMOS and Low Swing Output  PLL Lock-Detect Output Through GPO3 S Optimized Receiver Performance  Exceptional Receive Sensitivity  High Dynamic Range Sigma-Delta ADCs Allow Simple AGC Implementation with Switched Gain States S Optimized Transmitter Performance  Factory Calibrated for Gain, Carrier Leakage, and Sideband Suppression  10-Bit Gain Control Resolution for Better Power Accuracy  60dB Gain Control Range S Loopback Operating Mode from Tx Baseband Input to Rx Baseband Output S MAX-PHY Serial Digital Interface S SPI Read/Write Functionality S Operation Controlled by 4-Wire Serial Interface S Low-Cost, 7mm x 7mm TQFN Package Pin Configurations appear at end of data sheet. FUcTudeCnlmSecPcatoi2iosm0n0ama0tlurDainsdiiacaegamrtreiaaogmrnkisssoteIfcnrMoednduatsxisntimreuyrevIAnidcsteeasgotmrceaaintaerdtkdioooPnff.r.


MAX66242 MAX2550 MAX2022


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)