48-Bit Node Address
19-5071; 12/09
DS2502-E48 48-Bit Node Address Chip
www.maxim-ic.com
FEATURES
Factory programmed 48-bit node address ...
Description
19-5071; 12/09
DS2502-E48 48-Bit Node Address Chip
www.maxim-ic.com
FEATURES
Factory programmed 48-bit node address chip with 768 bits user-programmable OTPEPROM communicates with the economy of one signal plus ground
Provides valid MAC-48/EUI-48 Ethernet address
Unique, factory lasered and tested 64-bit registration number assures absolute traceability because no two parts are alike
Built-in multidrop controller ensures compatibility with other 1-Wire® products
Device is an “add-only” memory where additional data can be programmed into EPROM without disturbing existing data
Reduces control, address, data, power and programming signals to a single pin
Directly connects to a single port pin of a microprocessor and communicates at up to 16.3kbps
Presence detector acknowledges when reader first applies voltage
Low cost TO-92 or TSOC surface mount packages
Reads over a wide voltage range of 2.8V to 6.0V from -40°C to +85°C; programs at 11.5V to 12.0V from -40°C to + 50°C
1-Wire is a registered trademark of Maxim Integrated Products, Inc.
PIN CONFIGURATION
TO-92
BOTTOM VIEW TSOC PACKAGE
TOP VIEW
ORDERING INFORMATION
PART
TEMP
PIN-
RANGE
PACKAGE
DS2502-E48+
-40°C to +85°C 3 TO-92
DS2502P-E48+
-40°C to +85°C 6 TSOC
DS2502P-E48+T&R -40°C to +85°C 6 TSOC
+ Denotes a lead(Pb)-free/RoHS-compliant package. T&R = Tape and reel.
DESCRIPTION
The DS2502-E48 is a variant of the DS2502 1024-bit add-only memory. It differs from the standard DS2502 in its cu...
Similar Datasheet