3.3/5.0-Volt MicroMonitor
www.maxim-ic.com
DS1707/DS1708
3.3 and 5.0-Volt MicroMonitor
FEATURES
§ Holds microprocessor in check during power tra...
Description
www.maxim-ic.com
DS1707/DS1708
3.3 and 5.0-Volt MicroMonitor
FEATURES
§ Holds microprocessor in check during power transients
§ Automatically restarts microprocessor after power failure
§ Monitors pushbutton for external override § Accurate 5%, 10% or 20% resets for 3.3V
systems and 5% or 10% resets for 5.0V systems § Eliminates the need for discrete components § 20% tolerance compatible with 3.0V systems § Pin compatible with the MAXIM MAX707/MAX708 in 8-pin DIP, 8-pin SOIC packages
§ 8-pin DIP, 8-pin and m-SOP SOIC and 8-pin
m-SOP packages available
§ Industrial temperature range -40°C to +85°C
PIN ASSIGNMENT
PBRST 1
8 RST
VCC GND
2 3
7 RST 6 NC
IN 4
5 NMI
8-Pin DIP (300-mil)
PBRST
18
RST
VCC GND
27 36
RST NC
IN
45
NMI
8-Pin SOIC (150-mil)
RST RST PBRST VCC
1 2 3 4
8 NC
7 NMI 6 IN 5 GND
8-Pin m-SOP (118-mil)
See Mech. Drawings Section on website
DS1707 and DS1708_R/S/T
PIN DESCRIPTION
PBRST
VCC GND IN
- Pushbutton Reset Input - Power Supply - Ground - Input
NMI - Non-maskable Interrupt NC - No Connect
RST - Active Low Reset Output RST - Active High Reset Output
DESCRIPTION
The DS1707/DS1708 3.3- or 5.0-Volt MicroMonitor monitors three vital conditions for a microprocessor: power supply, voltage sense, and external override. A precision temperature-compensated reference and comparator circuit monitor the status of VCC at the device and at an upstream point for maximum protection. When the sense input detects an out-of-tolerance condition a no...
Similar Datasheet