DatasheetsPDF.com

MAX9509 Dataheets PDF



Part Number MAX9509
Manufacturers Maxim Integrated
Logo Maxim Integrated
Description DirectDrive Video Filter Amplifiers
Datasheet MAX9509 DatasheetMAX9509 Datasheet (PDF)

MAX9509/MAX9510 EVALUATION KIT AVAILABLE 1.8V, Ultra-Low Power, DirectDrive Video Filter Amplifiers General Description Operating from a 1.8V single power supply, the MAX9509/ MAX9510 amplify standard-definition video signals and only consume 5.8mW quiescent power and 11.7mW average power. The MAX9509/MAX9510 leverage Maxim’s DirectDrive® technology to generate a clean, internal negative supply. Combining the internal negative power supply with the external positive 1.8V supply, the MAX9509/ M.

  MAX9509   MAX9509


Document
MAX9509/MAX9510 EVALUATION KIT AVAILABLE 1.8V, Ultra-Low Power, DirectDrive Video Filter Amplifiers General Description Operating from a 1.8V single power supply, the MAX9509/ MAX9510 amplify standard-definition video signals and only consume 5.8mW quiescent power and 11.7mW average power. The MAX9509/MAX9510 leverage Maxim’s DirectDrive® technology to generate a clean, internal negative supply. Combining the internal negative power supply with the external positive 1.8V supply, the MAX9509/ MAX9510 are able to drive a 2VP-P video signal into a 150Ω load. Besides increasing the output voltage range, Maxim’s DirectDrive technology eliminates large output-coupling capacitors and sets the output video black level near ground. DirectDrive requires an integrated charge pump and an internal linear regulator to create a clean negative power supply so that the amplifier can pull the sync below ground. The charge pump injects little noise into the video output, making the picture visibly flawless. The MAX9509/MAX9510 are designed to operate from the 1.8V digital power supply. The high power-supply rejection ratio (49dB at 100kHz) allows the MAX9509/ MAX9510 to reject the noise from the digital power supply. The MAX9509 features an internal reconstruction filter that smoothes the steps and reduces the spikes on the video signal from the video digital-to-analog converter (DAC). The reconstruction filter typically has ±1dB passband flatness of 8.1MHz and 46dB attenuation at 27MHz. The large-signal, ±1dB passband flatness of the MAX9510 video amplifier is typically 8.4MHz, and the large signal -3dB frequency is typically 11.4MHz. The input of the MAX9509/MAX9510 can be directly connected to the output of a video DAC. The MAX9509/ MAX9510 also feature a transparent input sync-tip clamp, allowing AC-coupling of input signals with different DC biases. The MAX9509/MAX9510 have an internal fixed gain of 8. The input full-scale video signal is nominally 0.25VP-P, and the output full-scale video signal is nominally 2VP-P. The devices operate from a 1.8V or 2.5V single supply and feature a 10nA low-power shutdown mode. The MAX9509 is offered in an 8-pin TDFN package and the MAX9510 is offered in an 8-pin μMAX® package. Features ●● 5.8mW Quiescent Power Consumption ●● 11.7mW Average Power Consumption ●● 1.8V or 2.5V Single-Supply Operation ●● Reconstruction Filter with 8.1MHz Passband and 46dB Attenuation at 27MHz (MAX9509) ●● DirectDrive Sets Video Output Black Level near Ground ●● DC-Coupled Input/Output ●● Transparent Input Sync-Tip Clamp ●● Internal Fixed Gain of 8 ●● 10nA Shutdown Supply Current Applications ●● Digital Still Cameras (DSC) ●● Digital Video Cameras (DVC) ●● Portable Media Players (PMP) ●● Mobile Phones ●● Security/CCTV Cameras Block Diagram IN 250mVP-P VIDEO SHDN LPF* AV = OUT 8V/V TRANSPARENT CLAMP LINEAR REGULATOR MAX9509 MAX9510 CHARGE PUMP 0V 2VP-P VIDEO *FOR MAX9509 μMAX and DirectDrive are registered trademarks of Maxim Integrated Products, Inc. Pin Configurations appears at end of data sheet. Ordering Information PART RECONSTRUCTION FILTER PIN-PACKAGE MAX9509ATA+T Yes 8 TDFN-EP* MAX9510AUA+T No 8 µMAX-8 Note: All devices are specified over the -40°C to +125°C operating temperature range. +Denotes lead(PB)-free/RoHS-compliant package. *EP = Exposed pad. TOP MARK AAZ — 19-0727; Rev 2; 5/14 MAX9509/MAX9510 1.8V, Ultra-Low Power, DirectDrive Video Filter Amplifiers Absolute Maximum Ratings (Voltages with respect to GND.) VDD ..........................................................................-0.3V to +3V IN................................................................-0.3V to (VDD + 0.3V) OUT.......................(The greater of VSS and -1V) to (VDD + 0.3V) SHDN........................................................................-0.3V to +4V C1P ............................................................-0.3V to (VDD + 0.3V) C1N ............................................................(VSS - 0.3V) to +0.3V VSS...........................................................................-3V to +0.3V Duration of OUT Short Circuit to VDD, GND, and VSS........................................................Continuous Continuous Current IN, SHDN...........................................................................±20mA Continuous Power Dissipation (TA = +70°C) 8-Pin TDFN (derate 11.9mW/°C above +70°C).........953.5mW 8-Pin μMAX (derate 4.5mW/°C above +70°C).............362mW Operating Temperature Range ........................-40°C to +125°C Junction Temperature .....................................................+150°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature (soldering, 10s) .................................+300°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These ar.


MAX98303 MAX9509 MAX9510


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)