Three-Phase Brushless Motor Driver
Ordering number : EN7109A
LB11826
Monolithic Digital IC
For OA Products
Three-Phase Brushless Motor Driver
http://onse...
Description
Ordering number : EN7109A
LB11826
Monolithic Digital IC
For OA Products
Three-Phase Brushless Motor Driver
http://onsemi.com
Overview
The LB11826 is a three-phase brushless motor driver that is optimal for driving drum and paper feed motors in laser printers and plain paper copiers. This IC adopts a direct PWM drive technique for minimal power loss. Flexible control of motor speed in response to an externally provided clock frequency (corresponding to the FG frequency) can be implemented by using the LB11826 in conjunction with the Sanyo LB11825M.
Features
Three-phase bipolar drive (30V, 2.5V) Direct PWM drive Built-in low side inductive kickback absorbing diode Speed discriminator + PLL speed control Speed locked state detection output Built-in forward/reverse switching circuit Full complement of built-in protection circuits, including current limiter circuit, thermal protection circuit, and motor
constraint protection circuit.
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter Supply voltage Output current Allowable power dissipation
Operating temperature Storage temperature
Symbol VCC max
IO max Pd max1 Pd max2
Topr Tstg
Conditions
T ≤ 500ms Independent IC When infinitely large heat sink
Ratings 30 2.5 3 20
-20 to +80 -55 to +150
Unit V A W W °C °C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exp...
Similar Datasheet