3-Phase 650V 50A Automotive Smart Power Module
DATA SHEET www.onsemi.com
ASPM 27 Series
3−Phase 650 V, 50 A Automotive Smart Power Module
NFVA35065L32
General Descri...
Description
DATA SHEET www.onsemi.com
ASPM 27 Series
3−Phase 650 V, 50 A Automotive Smart Power Module
NFVA35065L32
General Description NFVA35065L32 is an advanced Automotive SPM® module
providing a fully−featured, high−performance inverter output stage for hybrid and electric vehicles. These modules integrate optimized gate drive of the built−in IGBTs to minimize EMI and losses, while also providing multiple on−module protection features including under−voltage lockouts, over−current shutdown, thermal monitoring of drive IC, and fault reporting. The built−in, high−speed HVIC requires only a single supply voltage and translates the incoming logic−level gate inputs to the high−voltage, high−current drive signals required to properly drive the module’s internal IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms.
Features
Automotive SPM in 27 Pin DIP Package AEC & AQG324 Qualified and PPAP Capable 650 V/50 A 3−Phase IGBT Inverter with Integral Gate Drivers
and Protections
175°C Guaranteed Short−Circuit Rated FS Trench IGBTs with Low
Vce(sat) and Fast Switching
Outstanding Thermal Resistance Using AlN DBC Substrate Separated Open−Emitter Pins from Low−Side IGBTs for
Three−Phase Current Sensing
Single−Grounded Power Supply LVIC Temperature−Sensing Built−In for Temperature Monitoring Isolation Rating: 2500 Vrms/1 min. Pb−Free and RoHS Compliant UI1557 Certified (File No. E209204) and UL94V−0 Compliant...
Similar Datasheet