Three-Phase Brushless Motor Driver
Ordering number : EN7229B
LB11920
Monolithic Digital IC
For OA Products
Three-Phase Brushless Motor Driver
http://onse...
Description
Ordering number : EN7229B
LB11920
Monolithic Digital IC
For OA Products
Three-Phase Brushless Motor Driver
http://onsemi.com
Overview
The LB11920 is a direct PWM drive motor driver IC for 3-phase power brushless motors. The PWM duty can be controlled by IC inputs, and it can be used over the wide supply voltage range of 9.5 to 30V.
Features
Three-phase bipolar drive (35V, 3.5V) Direct PWM drive Built-in high and low side kickback absorbing diodes Braking function (short-circuit braking) Built-in forward/reverse direction switching circuit Full complement of built-in protection circuits, including current limiter, low-voltage protection, motor lock
(physical constraint) protection, and thermal protection circuits The PWM duty can be controlled by IC inputs
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter Supply voltage 1 Supply voltage 2 Output voltage Output current Allowable power dissipation
Operating temperature Storage temperature
Symbol VM max VCC max VOUT max IO max Pd max1 Pd max2 Topr Tstg
Conditions
OUT1 to OUT3 T ≤ 500ms Independent IC With an infinitely large heat sink.
Ratings 35 7 35 3.5 3 20
-20 to +80 -55 to +150
Unit V V V A W W °C °C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Semicond...
Similar Datasheet