NFVA23512NP2T

ASPM34 Series Automotive 3−Phase 1200 V, 35 A IGBT Intelligent Power Module NFVA23512NP2T General Description NFVA23512NP2T is an advanced Auto IPM module providing a fully−featured, high−performance inverter output stage for hybrid and electric vehicles. These modules integrate optimized gate drive of the built−in IGBTs to minimize EMI and losses, while also providing multiple on−module protection features including under−voltage lockouts, over−current shutdown, thermal monitoring of drive IC, and fault reporting. The built−in, high−speed HVIC requires only a single supply voltage and translates the incoming logic−level gate inputs to the high−voltage, high−current drive signals required to properly drive the module’s internal IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms. Features Automotive SPM® in 34 pin DIP package AEC & AQG324 Qualified and PPAP Capable 1200 V − 35 A 3−Phase IGBT Inverter with Integral Gate Drivers and Protection Low−Loss, Short−Circuit Rated IGBTs Very Low Thermal Resistance using Al2O3 DBC Substrate Built−In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB Layout Separate Open−Emitter Pins from Low−Side IGBTs for Three−Phase Current Sensing Single−Grounded Power Supply Supported Built−In NTC Thermistor for Temperature Monitoring and Management Adjustable Over−Current Protection via Integrated Sense−IGBTs Isolation Rating of 2500 Vrms/1 min This is a ...