NRVHP8H200MFD

NRVHP8H200MFD Switch-Mode Power Rectifier This ultrafast rectifier in the dual flag SO−8 flat lead package offers designers a unique degree of versatility and design freedom. The two devices are electrically independent and can be used separately, as common cathode, as common anode or in series as a function of board level layout. The exposed pad design provides low thermal resistance. The clip attach design creates a package with very efficient die size to board area ratio. While thermal performance is nearly the same as the DPAK package height and board footprint are less than half. Features New Package Provides Capability of Inspection and Probe After Board Mounting Low Forward Voltage Drop 175°C Operating Junction Temperature NRV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These are Pb−Free and Halide−Free Devices Mechanical Characteristics: Case: Epoxy, Molded Epoxy Meets Flammability Rating UL 94−0 @ 0.125 in. Lead Finish: 100% Matte Sn (Tin) Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Device Meets MSL 1 Requirements Applications Excellent Alternative to DPAK in Space−Constrained Automotive Applications Output Rectification in Switching Power Supplies Freewheeling Diode used with Inductive Loads www.onsemi.com ULTRAFAST RECTIFIER 8 AMPERES (4x2), 200 VOLTS 1,2 7,8 3,4 5,6 1 DFN8 5x6 (SO8FL) CASE 506BT MARKI...