TSOP57538H

Datasheet Values Refer to PCN-OPT-1224-2022 www.vishay.com TSOP573..H, TSOP575..H Vishay Semiconductors IR Receiver Modules for Remote Control Systems DESCRIPTION This IR receiver series is optimized for short burst remote control systems in different environments. The customer can chose between different IC settings (AGC variants), to find the optimum solution for his application. The higher the AGC, the better noise is suppressed, but the lower the code compatibility. The devices contain a PIN diode and a preamplifier assembled on a lead frame. The epoxy package contains an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding. These components have not been qualified to automotive specifications. 22594 LINKS TO ADDITIONAL RESOURCES Product Page Marking FEATURES Individual IC settings to reach maximum performance Immunity against noise (lamps, LCD TV, Wi-Fi) Low supply current Photo detector and preamplifier in one package Supply voltage: 2.0 V to 5.5 V Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Infrared remote control systems DESIGN SUPPORT TOOLS 3D models Window size calculator BLOCK DIAGRAM 33 kΩ Input AGC Band pass Demodulator PIN 20445-6 Control circuit 4, 5 VS 1 OUT 2, 3, 6, 7, 8 GND Rev. 2.3, 30-Aug-2022 1 Document Number: 82652 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOC...