IR Receiver
www.vishay.com
TSOP75S..
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
4 3 2 1
20953
DESIGN SU...
Description
www.vishay.com
TSOP75S..
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
4 3 2 1
20953
DESIGN SUPPORT TOOLS click logo to get started
FEATURES Very low supply current Photo detector and preamplifier in one package Optimized for Sony and Cisco SA codes Supply voltage: 2.5 V to 5.5 V Improved immunity against ambient light Capable of side or top view Two lenses for high sensitivity and wide
receiving angle Insensitive to supply voltage ripple and noise Very narrow optical filter to minimize the interference from
3D synchronizing signals and other optical noise sources Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Models
Available
MECHANICAL DATA Pinning: 1, 4 = GND, 2 = VS, 3 = OUT
ORDERING CODE Taping: TSOP75...TT - top view taped TSOP75...TR - side view taped
DESCRIPTION
The TSOP75S.. series are two lens miniaturized receiver modules for infrared remote control systems. One PIN diode per lens and a preamplifier are assembled on a leadframe, the epoxy lens cap is designed as an IR filter.
The demodulated output signal can be directly decoded by a microprocessor. The TSOP75S.. is compatible with all common IR remote control data formats for TVs, including the Sony code. It is optimized to suppress almost all spurious pulses from energy saving fluorescent lamps but will also suppress some data signals.
This component has not been qualified according to automotive specifications.
PARTS TA...
Similar Datasheet