LM2726

LM2725, LM2726 www.ti.com SNVS144D – NOVEMBER 2000 – REVISED MARCH 2013 LM2725/LM2726 High Speed Synchronous MOSFET Drivers Check for Samples: LM2725, LM2726 FEATURES 1 2 High Peak Output Current Adaptive Shoot-Through Protection 36V SW Pin Absolute Maximum Voltage Input Under-Voltage-Lock-Out Typical 20ns Internal Delay Plastic 8-pin SOIC Package APPLICATIONS High Current DC/DC Power Supplies High Input Voltage Switching Regulators Microprocessors DESCRIPTION The LM2725/LM2726 is a family of dual MOSFET drivers that drive both the top MOSFET and bottom MOSFET in a push-pull structure simultaneously. It takes a logic level PWM input and splits it into two complimentary signals with a typical 20ns dead time in between. The built-in shoot-through protection circuitry prevents the top and bottom FETs from turning on simultaneously. With a bias voltage of 5V, the peak sourcing and sinking current for each driver of the LM2725 is about 1.2A and that of the LM2726 is about 3A. In an SOIC-8 package, each driver is able to handle 50mA average current. When EN signal is asserted the input UVLO (Under Voltage Lock Out) ensures that all the driver outputs stay low until the supply rail exceeds the power-on threshold during system power on, or after the supply rail drops below power-on threshold by a specified hysteresis during system power down. The cross-conduction protection circuitry detects both the driver outputs and will not turn on a driver until the other d...